We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 splitter cable with Type-E and 20-pin connectors, 11cm length

Vszerda

Vszerda USB 3.0 19/20Pin & Type-E Splitter to Dual 20Pin & Type-E, 5Gbps, 11cm

SKU CH-YQ4W-KHSH2

Splits a motherboard Type-E or 19/20-pin header into dual 20-pin and Type-E ports at 5Gbps with an included SATA power cable

  • TypeUSB Type C
  • Connector TypeUSB Type C
  • Cable Length11 centimeters
  • Length11 centimeters
  • Connector Number1
  • Connector DetailUSB Type C
  • Connect motherboard Type-E or 19/20Pin header to dual 20Pin and Type-E ports
  • Achieve 5Gbps transfer rates, 10 times faster than USB 2.0
  • Includes SATA power cable for stable dual-port operation
  • 11 cm cable keeps front-panel wiring tidy inside the case
  • Supports two-way simultaneous data transmission for hubs, card readers and more

Splitter for dual USB 3.0 headers

This adapter converts a single motherboard Type-E or 19/20Pin header into two USB 3.0 20Pin and Type-E sockets. It is intended for builders who need extra front-panel USB ports from one internal connector. The 11cm cable keeps routing tidy inside the case. An included SATA power cable supplies the extra port.

SATA power enables the second port

The bundled SATA power cable provides the additional current required for the dual-output design. Without it the splitter cannot drive both USB 3.0 20Pin and Type-E sockets simultaneously. Connected devices such as front panels, hubs or card readers then receive full bus power. The short cable length limits placement to nearby headers.

5 Gbps shared across both outputs

The USB 3.0 interface caps total bandwidth at 5 Gbps, which both ports share. Simultaneous transfers on the two sockets will divide this throughput. The adapter does not increase the motherboard's native USB 3.0 controller limits. Buyers needing independent 5 Gbps lanes per port cannot achieve that with this splitter.

Highlights

  • Connect motherboard Type-E or 19/20Pin header to dual 20Pin and Type-E ports
  • Achieve 5Gbps transfer rates, 10 times faster than USB 2.0
  • Includes SATA power cable for stable dual-port operation
  • 11 cm cable keeps front-panel wiring tidy inside the case
  • Supports two-way simultaneous data transmission for hubs, card readers and more

Specifications

Brandxiwai
ModelU3-084-EF+UC-117-XY
TypeUSB Type C
Connector TypeUSB Type C
Cable Length11 centimeters
Length11 centimeters
Connector Number1
Connector DetailUSB Type C
Terminal GenderType-E or 19/20Pin to 20Pin & Type-E
SpeedType-E or 19/20Pin to 20Pin & Type-E
Apple CompatibleUSB Type C
SpecificationsUSB Type C, 11, centimeters, U3-084-EF+UC-117-XY, xiwai, Personal Computer
Conductortile
Constructiontile
FeaturesUSB Type C, Personal Computer

Questions about this item

Will the included SATA power cable need replacing if I upgrade my PSU?

The adapter ships with a SATA power cable that draws from your existing PSU; any standard SATA power lead from a new supply will work the same way.

What bandwidth ceiling appears first when both dual 20-pin ports run at full load?

The splitter shares a single 5Gbps USB 3.0 uplink, so combined throughput from both ports cannot exceed that 5Gbps limit.

Does the 11 cm cable run warm or add fan noise when the front-panel ports are active all day?

The short passive cable and PCB have no active cooling, so they add no fan noise and generate only minimal warmth during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.