We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short flat cable with 20-pin male header and Type-E female port, black connectors, 20cm length

Vszerda

Vszerda USB 3.0 19/20Pin to USB 3.1 Type-E Header Cable 20cm

SKU CH-WTEP-ZZNBK

Connects a motherboard 19/20-pin USB 3.0 header to a USB 3.1 Type-E front-panel port over 20 cm

  • TypeUSB
  • Connector TypeUsb 3.0 20pin
  • Connector Number20
  • Connector DetailUsb 3.0 20pin
  • Terminal GenderMale-to-Female
  • Speed0.48 gigabits_per_second
  • Connects front-panel Type-E header to 20-pin USB 3.0 motherboard connector
  • Male-to-female 20cm extension simplifies internal cable routing
  • Copper construction with tangle-free design ensures reliable signal integrity
  • Supports 10 Gbps data from SSD or HDD via Type-E port
  • Single-channel Type-E output limited to USB 3.0 performance

USB 3.0 20-pin to Type-E adapter

This Vszerda cable converts a motherboard USB 3.0 20-pin header into a single USB 3.1 Type-E front-panel port. The male-to-female construction uses copper conductors and measures 20 cm long. It is intended for builders adding one Type-C front connector to a board that only exposes the legacy 20-pin header.

Builders needing one front Type-C port

The adapter suits PC builders who want a single USB 3.1 Gen 1 Type-E port on the front panel and have a free 20-pin header. It does not support audio, video, DisplayPort alt mode or Power Delivery, so users requiring docking, video output or PD charging must use a different internal solution. Reverse insertion of a 19-pin to Type-C cable limits that side to USB 2.0 only.

Single-channel Type-E limitation

Because the Type-E interface is single-channel, the cable can only deliver one USB 3.0 data path; it cannot split the header into two independent USB 3.0 ports. The port supports up to 10 Gbps from an SSD or HDD, but actual throughput depends on the motherboard's Type-E implementation.

Highlights

  • Connects front-panel Type-E header to 20-pin USB 3.0 motherboard connector
  • Male-to-female 20cm extension simplifies internal cable routing
  • Copper construction with tangle-free design ensures reliable signal integrity
  • Supports 10 Gbps data from SSD or HDD via Type-E port
  • Single-channel Type-E output limited to USB 3.0 performance

Specifications

BrandVszerda
TypeUSB
Connector TypeUsb 3.0 20pin
Connector Number20
Connector DetailUsb 3.0 20pin
Terminal GenderMale-to-Female
Speed0.48 gigabits_per_second
ConstructionCopper
FeaturesTangle Free

Questions about this item

Does my motherboard need a 20-pin USB 3.0 header to plug this cable in?

Yes, the cable connects to a 20-pin USB 3.0 header on the motherboard and provides a USB 3.1 Type-E connector for the front panel.

Will the adapter let me run two separate USB 3.0 ports from one Type-E header?

No, the Type-E interface is single-channel so it can only deliver one USB 3.0 link; the second port will operate at USB 2.0 speed.

How can I confirm the cable is delivering USB 3.0 performance after installation?

Connect a USB 3.0 storage device and check that the transfer rate reaches the 0.48 Gbps link speed reported by the system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.