We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black adapter with a 19 20 pin male header and a Type E female port bent 90 degrees

Vszerda

Vszerda USB 3.0 19/20Pin to USB 3.1/3.2 Type-E Adapter Reverse 90 degree

SKU CH-10Z0-ZEP4Q

Converts a motherboard USB 3.0 19/20-pin header to a USB 3.1/3.2 Type-E front-panel connector with a 90-degree reverse design for up to 10Gbps data transfer

  • Connector TypeLighting Connector to USB A
  • Converts 19/20-pin header to USB 3.2 Type-E front panel
  • Up to 10 Gbps data transfer for fast front-panel I/O
  • Plug-and-play with Windows, Mac and Linux, no drivers needed
  • Reverse 90-degree design eases routing in tight chassis
  • Not compatible with USB 2.0 motherboard headers

Motherboard Header Adapter for Front-Panel USB-C

This adapter converts a motherboard USB 3.0 19 or 20 pin internal header into a USB 3.1 and 3.2 Type-E female connector. It targets PC builders adding a USB-C front-panel port to a chassis that requires the newer A-Key interface. The right-angle design helps routing in tight spaces. It supports Windows XP through Windows 10, macOS and Linux without driver installation.

Connector Compatibility Is the Deciding Factor

The adapter only works with motherboards that provide a USB 3.0 or 3.1 Gen 2 IDC 20 pin header. It is explicitly not compatible with USB 2.0 IDC connectors found on older boards. Builders must verify their motherboard header type before purchase. Using the wrong header will prevent the adapter from functioning.

Passive Design Means No Extra Power or Noise

The unit draws power directly from the motherboard header and adds no active cooling or moving parts. Normal operation produces no audible noise and negligible thermal output. Installation requires the system to be fully powered off and unplugged to avoid shorting pins. Following the step-by-step fitting order prevents power-draw warnings.

Highlights

  • Converts 19/20-pin header to USB 3.2 Type-E front panel
  • Up to 10 Gbps data transfer for fast front-panel I/O
  • Plug-and-play with Windows, Mac and Linux, no drivers needed
  • Reverse 90-degree design eases routing in tight chassis
  • Not compatible with USB 2.0 motherboard headers

Specifications

Connector TypeLighting Connector to USB A

Questions about this item

What does the 10 Gbps figure mean when the adapter is installed in a real machine?

It means the link can move data at up to 10 Gbps between a motherboard USB 3.0 19/20-pin header and a front-panel USB 3.1/3.2 Type-E port, provided the motherboard header and the front-panel device both support that speed.

Which interface standard does the adapter use, and what does it cap in practice?

The adapter converts a USB 3.0 19/20-pin internal header to a USB 3.1/3.2 Type-E A-Key 20-pin female header, capping the connection at the 10 Gbps rate of the USB 3.1 Gen 2 / USB 3.2 Gen 2 specification.

What does the 90-degree reverse design need to fit or mount inside a case?

The right-angle male plug inserts into the motherboard USB 3.0 19/20-pin header, while the female Type-E receptacle mounts to a front-panel bracket cut-out; the reverse orientation routes the cable toward the motherboard edge to clear nearby components.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.