Vszerda
Vszerda USB 2.0 Type-A Male to Male Down Angled FPC Cable 90 Degree 200cm
A flat 200 cm FPC cable with a 90-degree down-angled USB 2.0 Type-A male plug on each end, rated for 480 Mbps data and supplied unassembled
- TypeUSB
- Connector TypeUSB Type A
- ColorBlack
- Cable Length200
- Length200
- Connector DetailUSB Type A
- Down-angled 90° connector fits tight spaces
- USB 2.0 Type-A male-to-male links drives and printers
- 200 cm flat FPC cable routes cleanly
- 480 Mbps data rate handles everyday transfers
- Self-assembly design lets you customise the build
Down-angled USB 2.0 Type-A male cable for tight
This flat FPC cable carries USB 2.0 data at 480 Mbps between two Type-A ports. The 90-degree down-angled plugs fit low-clearance headers on flight controllers, scanner beds or printer boards. It is aimed at FPV builders and anyone wiring USB devices in confined chassis.
Passive copper construction draws no extra power
The 200 cm copper conductors operate entirely within the USB 2.0 spec, adding no measurable heat or noise to the host. Because the cable is unshielded flat flex, keep it away from high-current motor leads to avoid interference.
Supplied as separate cable
You receive the flat ribbon and the two Type-A housings unassembled; follow the included photo guide to crimp or solder them. No driver disc or configuration software is bundled — the link enumerates as a standard USB 2.0 data path once assembled.
Highlights
- Down-angled 90° connector fits tight spaces
- USB 2.0 Type-A male-to-male links drives and printers
- 200 cm flat FPC cable routes cleanly
- 480 Mbps data rate handles everyday transfers
- Self-assembly design lets you customise the build
Specifications
| Brand | xiwai |
|---|---|
| Type | USB |
| Connector Type | USB Type A |
| Color | Black |
| Cable Length | 200 |
| Length | 200 |
| Connector Detail | USB Type A |
| Terminal Gender | Male-to-Male |
| Speed | 0.48 gigabits_per_second |
| Construction | Copper |
| Features | High Speed |
Questions about this item
How do I assemble the flat FPC cable and the down-angled USB Type-A connectors that arrive separate?
The cable and connectors ship unassembled; align each connector with the exposed FPC traces, press fully into the housing until it clicks, and verify the 90-degree down angle points the same way on both ends before use.
Will the flat copper FPC cable need replacement if it is bent repeatedly for a brushless gimbal?
The flat copper FPC is flexible but not rated for continuous flex cycles; inspect for trace cracks after heavy gimbal use and replace the cable if signal drops appear.
What throughput limit appears first during a long 480 Mbps transfer over the 200 cm length?
The USB 2.0 480 Mbps signalling ceiling is reached before any cable-length attenuation becomes noticeable at 200 cm.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
