We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda USB 2.0 Type-A male to dual 9-pin header hub cable, metallic finish

Vszerda

Vszerda USB 2.0 Type-A Male to 2 Female 9-pin Header HUB Cable

SKU CH-YW4Z-RJDQH

Converts one USB 2.0 header into two ports with an onboard hub chip running at 480 Mbps and 500 mA per port

  • TypeUSB Type A
  • Connector TypeUSB Type A
  • ColorMetallic
  • Connector Number1
  • Connector DetailUSB Type A
  • Terminal GenderCable USB 1to2
  • Add two internal USB ports from one motherboard header
  • Back-glue strip lets you secure the cable to the board or chassis
  • Each port delivers up to 500 mA at 5 V
  • Built-in USB 2.0 hub chipset handles 480 Mbps throughput
  • Male Type-A plug splits to two 9-pin female headers

Add two internal USB ports

This Vszerda adapter converts a single USB 2.0 Type-A male header into two 9-pin female headers. It is built for desktop builders who need extra front-panel or internal USB connections without adding a PCIe card. The cable uses copper conductors and includes an onboard USB 2.0 hub chipset. Adhesive backing lets you secure it directly to the motherboard or chassis.

Upgrade from a single header

The cable replaces a lone 9-pin header that limits you to one internal USB device. The jump is worth it when your case provides two front-panel ports but the board only exposes one header, or when you want to run a second internal device such as a Bluetooth module. Each port delivers up to 500 mA at 5 V and the hub supports 480 Mbps throughput. Builders who need more than two ports or higher bandwidth should look elsewhere.

Plug into the 9-pin header

Installation is a straight header-to-header connection; no drivers are required for the hub chipset. The adhesive strip helps keep the PCB in place inside a crowded case. What usually goes wrong is reversing the plug orientation — the keyed shroud prevents damage but the cable will not work until seated correctly. Ensure the motherboard header is wired to the standard pin-out; non-standard layouts can leave ports dead.

Highlights

  • Add two internal USB ports from one motherboard header
  • Back-glue strip lets you secure the cable to the board or chassis
  • Each port delivers up to 500 mA at 5 V
  • Built-in USB 2.0 hub chipset handles 480 Mbps throughput
  • Male Type-A plug splits to two 9-pin female headers

Specifications

Brandxiwai
ModelU2-066-XY
TypeUSB Type A
Connector TypeUSB Type A
ColorMetallic
Connector Number1
Connector DetailUSB Type A
Terminal GenderCable USB 1to2
SpeedCable USB 1to2
Apple CompatibleUSB Type A
SpecificationsUSB Type A, U2-066-XY, xiwai, Desktop
ConductorCopper
ConstructionCopper
FeaturesUSB Type A, Desktop
Disclaimernot_applicable

Questions about this item

Does the 9-pin header cable fit a standard motherboard USB 2.0 header?

Yes, the cable ends in two standard 9-pin female headers that plug directly onto a motherboard USB 2.0 header.

How is the hub secured inside the case during installation?

The hub has adhesive backing so it can be stuck to the motherboard tray or chassis wall before connecting the headers.

What power limit should I watch for when devices are plugged into the two ports?

Each port is rated for 500 mA at 5 V, so the combined draw should not exceed that per port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.