We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small USB adapter cable with black connectors and short ribbon lead

Vszerda

Vszerda USB 2.0 to 3.1 Header Adapter U2-128+UC-022

SKU CH-X834-CBVND

Converts a motherboard USB 2.0 header into two USB 3.1 front-panel headers with a compact plug-in adapter

  • Constructioncopper
  • Converts a USB 2.0 header into two USB 3.1 headers
  • Compact plug-in design needs no extra brackets or cables
  • Copper construction for reliable signal transfer
  • Supports USB 2.0 speeds up to 480 Mbit/s
  • Fits any standard motherboard USB 2.0 9-pin or 10-pin header

What this adapter does

The Vszerda U2-128+UC-022 converts a single motherboard USB 2.0 header into two vertical USB 3.1 Type E front-panel headers. It plugs directly into the 9-pin or 10-pin USB 2.0 connector on the board and requires no extra brackets or cables. The copper construction carries signals for the front-panel ports on a desktop case.

Sustained transfer behaviour

The link runs at the USB 2.0 electrical rate of 480 Mbit/s, so any device attached to the new USB 3.1 headers will be limited to that bandwidth under continuous load. The adapter does not increase the signalling speed of the original header; it only changes the physical connector type.

Check before ordering

Verify that your motherboard has a free standard USB 2.0 front-panel header (9-pin or 10-pin) and that your case front panel uses the USB 3.1 Type E header style. The adapter will not work with internal USB 3.0/3.1 19-pin headers, nor does it add USB 3.1 signalling capability where only USB 2.0 exists.

Highlights

  • Converts a USB 2.0 header into two USB 3.1 headers
  • Compact plug-in design needs no extra brackets or cables
  • Copper construction for reliable signal transfer
  • Supports USB 2.0 speeds up to 480 Mbit/s
  • Fits any standard motherboard USB 2.0 9-pin or 10-pin header

Specifications

Brandchenyang
Constructioncopper

Questions about this item

Does the adapter generate noticeable heat or draw extra power when left connected to the USB 2.0 header all day?

It is a passive copper cable and adapter with no active electronics, so it adds no measurable heat or power draw beyond the devices you plug into the USB 3.1 headers.

What must my motherboard already have for this adapter to work?

Your motherboard needs a free internal USB 2.0 header (9-pin or 10-pin) to accept the adapter's plug-in connector.

Will the USB 3.1 front-panel ports on my older case run at full speed through this adapter?

No — the link is limited to the USB 2.0 header's 480 Mbit/s bandwidth, so connected devices operate at USB 2.0 speeds despite the USB 3.1 header form factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.