Vszerda
Vszerda USB 2.0 B Male-Female Extension Cable Up Angled 90° 20cm
A 20 cm USB 2.0 B male-to-female extension cable with a 90° upward angle for tight spaces, double-shielded copper conductors, and 480 Mbps data speed
- TypeUSB
- Connector TypeUsb2.0
- ColorBlack Up Angled
- Connector Number4
- Connector DetailUsb2.0
- Terminal GenderMale-to-Female
- Upward 90° angle fits tight ports
- Male-to-female USB B extends existing cables 20 cm
- Double foil-and-braid shielding cuts EMI
- Pure copper cores keep 480 Mbps signals clean
- Works with printers, scanners and hard disks
Up-Angled USB 2.0 B Extension
This 20 cm cable has a male USB 2.0 B plug on one end and a female USB 2.0 B socket on the other. The connector bends 90 degrees upward so it fits behind printers, scanners or external drives where rear clearance is tight. It extends an existing USB 2.0 B link without adding strain to the device port.
Replacing Straight Cables In Cramped Spaces
A straight USB 2.0 B cable often presses against a wall or desk and bends sharply, risking port damage or signal loss. This angled adapter removes that bend by routing the cable upward from the socket. The upgrade is worth it whenever the device sits flush against a surface and the stock cable cannot relax naturally.
Check Port Orientation And Cable Reach
Verify the host device uses a standard USB 2.0 B female port and that the upward angle points toward free space, not into an obstruction. Confirm the 20 cm length plus your existing cable reaches the host computer without tension. The cable supports 480 Mbps data rates, so ensure the connected equipment operates at USB 2.0 speed.
Highlights
- Upward 90° angle fits tight ports
- Male-to-female USB B extends existing cables 20 cm
- Double foil-and-braid shielding cuts EMI
- Pure copper cores keep 480 Mbps signals clean
- Works with printers, scanners and hard disks
Specifications
| Brand | Vszerda |
|---|---|
| Type | USB |
| Connector Type | Usb2.0 |
| Color | Black Up Angled |
| Connector Number | 4 |
| Connector Detail | Usb2.0 |
| Terminal Gender | Male-to-Female |
| Speed | 480 megabits_per_second |
| Construction | Copper |
| Features | USB2.0 Angled |
Questions about this item
How much clearance does the 90° up-angled USB B male connector need above the port?
The 90° up angle lets the cable run parallel to the device, so it fits where a straight plug would hit a wall or shelf.
Which way round do I plug the male and female ends for a printer?
Insert the male USB B end into the printer’s upstream port, then attach your existing cable to the female end — reversing them breaks the signal path.
Will the foil-and-braid shielding degrade after repeated bending?
The double-shielded, pure-copper construction is rated for the USB 2.0 480 Mbps signal and resists EMI; replace only if the jacket or connectors show physical damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


