Vszerda USB 2.0 A Male to 90° B Male Printer Cable 1.5m

90-degree USB 2.0 printer cable

The Vszerda cable connects a standard USB Type-A port to a right-angled Type-B port on printers, scanners, all-in-one units, servers or external hard drives. Its 1.5 metre length suits desktop or notebook setups where the peripheral sits close to the host. Gold-plated contacts and foil-plus-braid shielding are used to reduce signal loss and electromagnetic interference. The moulded 90-degree bend lets the connector fit into tight rear-panel spaces without stressing the port.

Sustained throughput at USB 2.0 limits

The link operates at the USB 2.0 High-Speed ceiling of 480 Mbps, so bulk-endpoint transfers such as multi-page print jobs or scanner uploads run at the full protocol rate rather than falling back to Full-Speed 12 Mbps. Because the connection is wired, latency and jitter remain constant regardless of local radio congestion, unlike wireless alternatives. Backward compatibility with USB 1.0 and 1.1 hosts means older legacy ports will still enumerate the device, though at their native lower signalling rates.

Practical limits of the USB 2.0 Type-B interface

The Type-B plug is not mechanically compatible with USB 3.0 Type-B receptacles, so the cable cannot be used on SuperSpeed-only peripheral ports. Maximum cable length for reliable High-Speed operation is defined by the USB 2.0 specification at 5 metres; this 1.5 metre assembly stays well within that bound. No external driver installation is required on supported operating systems from Windows 98 through Windows 7 and Mac OS 9.0 or higher, as the device uses the standard USB printer/class drivers already present in those systems.