We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 header splitter cable with four female ports and IDE power connector

Vszerda

Vszerda USB 2.0 9pin 10pin Header 1 to 4 Female Splitter with IDE Power

SKU CH-Z0A8-5857D

Expands one internal USB 2.0 header into four female ports with an IDE power connector for extra 5 V supply

  • TypeUSB
  • Connector TypeUsb2.0
  • ColorBlack 1 to 4 Cable+Power
  • Connector DetailUsb2.0
  • Terminal GenderMale
  • Speed480 megabits_per_second
  • Expands one 9-pin header into four USB 2.0 ports
  • Built-in USB 2.0 hub chipset delivers 480 Mbps data speed
  • Each port supplies 500 mA at 5 V via IDE power connector
  • Adhesive backing secures the splitter to motherboard or chassis
  • Copper conductors ensure reliable internal USB connectivity

Vszerda USB 2.0 Header Splitter

This Vszerda splitter converts one internal USB 2.0 header into four female 9-pin ports. An onboard USB 2.0 hub chipset manages the expansion while maintaining 480 megabits per second signal speed. A supplementary IDE 4-pin power connector delivers 500 milliampere of 5-volt current to each port. Adhesive backing allows the board to be secured directly to the motherboard or chassis.

Builders adding multiple internal USB devices

The adapter suits builders who need to connect several 9-pin front-panel ports, card readers or internal accessories to a single motherboard header. It is not for users who require USB 3.0 or higher throughput. It is not for systems lacking a spare IDE power connector to supply the extra current. It is not for external peripheral expansion.

Single 9-pin header becomes four powered ports

The decisive specification is the 1-to-4 header multiplication with dedicated IDE power input. This topology lets four internal USB 2.0 devices operate simultaneously from one motherboard connector without overloading the board's own 5-volt rail.

Highlights

  • Expands one 9-pin header into four USB 2.0 ports
  • Built-in USB 2.0 hub chipset delivers 480 Mbps data speed
  • Each port supplies 500 mA at 5 V via IDE power connector
  • Adhesive backing secures the splitter to motherboard or chassis
  • Copper conductors ensure reliable internal USB connectivity

Specifications

BrandVszerda
TypeUSB
Connector TypeUsb2.0
ColorBlack 1 to 4 Cable+Power
Connector DetailUsb2.0
Terminal GenderMale
Speed480 megabits_per_second
ConstructionCopper
FeaturesUSB2.0 HUB Splitter

Questions about this item

Does my motherboard need a spare 9-pin or 10-pin USB 2.0 header to use this splitter?

Yes, the splitter plugs into one 9-pin or 10-pin USB 2.0 header on the motherboard and provides four female 9-pin ports.

Will the four ports share the 480 megabits per second bandwidth with my existing USB 2.0 devices?

Yes, all four ports run through a single USB 2.0 hub chipset, so the 480 megabits per second bandwidth is shared among them and any other devices on that header.

How can I confirm each port is delivering the rated 500 milliampere current after installation?

Connect a device to each port and verify it powers on; the IDE 4-pin power connector supplies the extra 5 V needed for the hub to provide up to 500 milliampere per port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.