We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A short Y-splitter cable with a 9/10-pin header plug and two USB 2.0 male ends

Vszerda

Vszerda USB 2.0 9/10Pin Header to 2 Male Y Splitter 0.5M

SKU CH-BHQC-AA6R5

Splits one internal 9/10-pin header into two USB 2.0 male ports at 480 Mbit/s over a .5 m cable

  • TypeUSB
  • Connector TypeUsb 2.0
  • Connector Number11
  • Connector DetailUsb 2.0
  • Terminal GenderMale-to-Female
  • Speed480 megabits_per_second
  • Converts one motherboard header into two USB 2.0 ports
  • 5 m cable keeps internal routing tidy
  • Compact design plugs straight in without extra brackets
  • Copper construction delivers 480 Mbit/s data speed
  • Works with any standard 9/10-pin USB 2.0 header

Vszerda USB 2.0 header splitter

This adapter converts a single internal motherboard USB 2.0 header into two standard USB 2.0 male ports. It is designed for PC builders who need extra front-panel or external connections without using a rear I/O slot. The compact 0.5 metre cable plugs directly into a 9- or 10-pin header and requires no additional power or mounting hardware.

USB 2.0 speed and header limits

The link operates at the USB 2.0 maximum of 480 megabits per second, so attached devices share that bandwidth. Only two downstream ports are provided by the 11-connector assembly. Longer cable runs or additional hubs are not supported by this adapter, and the 0.5 metre length restricts placement to positions close to the motherboard header.

Check header pinout and clearance

Verify that your motherboard exposes a standard 9- or 10-pin USB 2.0 front-panel header with the correct keying before ordering. Ensure there is enough space around the header for the splitter body and that the 0.5 metre reach suits your chassis routing. The adapter draws power from the header itself, so confirm the header can supply sufficient current for both connected devices.

Highlights

  • Converts one motherboard header into two USB 2.0 ports
  • 5 m cable keeps internal routing tidy
  • Compact design plugs straight in without extra brackets
  • Copper construction delivers 480 Mbit/s data speed
  • Works with any standard 9/10-pin USB 2.0 header

Specifications

Brandchenyang
TypeUSB
Connector TypeUsb 2.0
Connector Number11
Connector DetailUsb 2.0
Terminal GenderMale-to-Female
Speed480 megabits_per_second
ConstructionCopper
FeaturesCompact

Questions about this item

Should I pick the 9-pin or 10-pin header version for my motherboard?

The adapter fits any standard USB 2.0 motherboard header; the 9/10-pin designation covers both common keying layouts, so one cable works with either.

What does the 480 Mbit/s rating mean when I plug in two devices?

The 480 Mbit/s is the total USB 2.0 bandwidth shared between the two ports, so simultaneous transfers will split that throughput.

Does the USB 2.0 header limit the cable length or speed in practice?

The 50 cm tail stays within USB 2.0 signalling limits, so the full 480 Mbit/s rate is maintained without active repeater circuitry.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.