Vszerda
Vszerda UC-211-RI-2507MM-XY DC Jack 2.5x0.7mm to USB-C 90° 65W internal power cable
Converts a 2.5x0.7mm DC jack to USB-C with a 90° plug for tight spaces, delivering up to 65W via PD and multiple fast-charge protocols
- Connector Number1
- Fits tight spaces with 90° right-angled connector
- Delivers up to 65W via USB-C Power Delivery
- Accepts DC 18v-20v input from 2.5x0.7mm jack
- Supports QC2.0, QC3.0, FCP, AFC, SCP protocols
- Verify device voltage and current before use to prevent damage
Connector and purpose
This internal power cable adapts a DC jack 2.5x0.7mm input to a USB-C 90° angled connector. It suits builders or repairers who need to feed a USB-C device from an existing DC power source inside a chassis or enclosure.
Sustained-load behaviour
The adapter accepts 18v-20v DC input and delivers up to 65W max across fixed output profiles of 5V/2A, 9V/3A, 15V/2A and 20V/3.25A. It negotiates power via PD, QC2.0, QC3.0 and several proprietary fast-charge protocols without active cooling.
Compatibility checks
Verify that your DC source stays within the 18v-20v range and can supply the required current for the desired output profile. Confirm the target device’s rated voltage and current match one of the fixed output steps to avoid damage. Ensure the 90° angled plug clears surrounding components in your build.
Highlights
- Fits tight spaces with 90° right-angled connector
- Delivers up to 65W via USB-C Power Delivery
- Accepts DC 18v-20v input from 2.5x0.7mm jack
- Supports QC2.0, QC3.0, FCP, AFC, SCP protocols
- Verify device voltage and current before use to prevent damage
Specifications
| Brand | xiwai |
|---|---|
| Model | UC-211-RI-2507MM-XY |
| Connector Number | 1 |
Questions about this item
Does the 90° angled plug run cooler than a straight connector when delivering 65W all day?
The 90° angle only saves space around tight ports; heat depends on the power source and device load, not the plug shape.
Must my USB-C device support Power Delivery to use this adapter?
Yes — the adapter outputs 5V/2A, 9V/3A, 15V/2A or 20V/3.25A via USB PD, so the connected device must accept one of those PD profiles.
Can I keep using my original 18V-20V barrel charger with this cable?
The cable accepts DC 18V-20V input from your existing barrel charger and converts it to USB-C PD output up to 65W.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



