We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda USB 3.0 20-pin to dual Type A angled cable 30cm

Vszerda

Vszerda U3-088-UP USB 3.0 20-Pin to Dual Type A Angled 30cm

SKU CH-Q8NJ-CMRNF

Connects a motherboard 20-pin header to two front-panel USB 3.0 Type-A ports with a 90-degree angled bracket and 30 cm cable

  • TypeUSB
  • Connector TypeUSB Type A
  • Connector Number20
  • Connector DetailUSB Type A
  • Terminal GenderMale-to-Female
  • Speed5 gigabits_per_second
  • Converts a motherboard 20-pin header to two front-panel USB 3.0 Type-A ports
  • 90-degree upward angled connectors fit tight clearances around the header
  • Dual screw-mount holes secure the Type-A bracket to the case front panel
  • 30 cm copper cable supports 5 Gbps SuperSpeed data transfer
  • Two-way simultaneous transmission keeps both ports active at full bandwidth

Front-panel USB 3.0 adapter

This 30 cm cable converts a motherboard 20-pin header into two USB 3.0 Type A ports for front-panel access. The 90-degree upward angle eases routing in tight chassis corners. Two screw holes on the female end secure the bracket to the case. Rated at 5 Gbps, it supports simultaneous two-way data transfer.

Upgrade from USB 2.0 headers

Replaces a legacy USB 2.0 front-panel connection with a 5 Gbps link that is ten times faster. The jump is worthwhile when you regularly move large files to external drives or need the bandwidth for modern peripherals. If your case only offers USB 2.0 ports, this cable adds current-generation speed without a motherboard swap.

Build integration

Plugs directly into the board’s 20-pin USB 3.0 header and requires no extra power or drivers. The short 30 cm length keeps signal integrity high and reduces cable clutter behind the front panel. The angled connector frees vertical clearance around crowded headers. Ensure the case front panel has a cut-out that matches the dual Type A bracket spacing.

Highlights

  • Converts a motherboard 20-pin header to two front-panel USB 3.0 Type-A ports
  • 90-degree upward angled connectors fit tight clearances around the header
  • Dual screw-mount holes secure the Type-A bracket to the case front panel
  • 30 cm copper cable supports 5 Gbps SuperSpeed data transfer
  • Two-way simultaneous transmission keeps both ports active at full bandwidth

Specifications

Brandchenyang
ModelU3-088-UP
TypeUSB
Connector TypeUSB Type A
Connector Number20
Connector DetailUSB Type A
Terminal GenderMale-to-Female
Speed5 gigabits_per_second
ConstructionCopper
Featuresangled

Questions about this item

What motherboard header and front-panel cut-out does the 20-pin plug fit?

The cable plugs into a standard motherboard 20-pin USB 3.0 header and the dual Type-A bracket has two screw holes for a front-panel mount.

Which way does the 90-degree angled connector point, and what clearance does it need?

The UP-angled ends rise 90 degrees from the cable, letting you seat the bracket in tight spaces where a straight connector would hit the case wall.

How long is the cable run from header to bracket, and will it reach a bottom-mounted header?

The assembly is approximately 30 cm long, so measure from your motherboard header to the front-panel opening before ordering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.