Vszerda
Vszerda Type-A & Type-C Female Socket to 2Pin Header Cable 75mm Latch Mount 2.54mm Pitch
A 75 mm latch-mount cable converts Type-A and Type-C female sockets to a 2.54 mm pitch 2-pin header for DC 5 V power delivery
- ColorBlack
- Delivers up to DC 5V 2A shared power for charging devices
- 75 mm cable with 2.54 mm pitch header fits tight DIY builds
- Latch-mount female sockets secure Type-A and Type-C connections inside cabinets
- Reversible Type-C plug inserts either way for quick hookup
- Supplies power only to phones, tablets, laptops and other USB peripherals
DIY USB Power Cable
This Vszerda cable provides a Type-A and a Type-C female socket on a 75 mm lead that terminates in a 2.54 mm pitch 2-pin header. It is intended for DIY and OEM builders who need to bring USB 2.0 power to a front panel or enclosure. The connectors share a single DC 5 V 2 A power path. No data lines are wired.
Suited to panel-mount power only
The latch-mount sockets let you secure the cable to a cabinet or chassis so devices can plug in for charging. Builders who need USB data transfer, higher current than 2 A, or a different header pitch should look at other solutions. The reversible Type-C orientation eases insertion but does not add any data capability.
2.54 mm pitch 2-pin header
The single specification that decides fit is the 2.54 mm pitch 2-pin header at the board end. Your motherboard or controller must provide an identical header; a different pitch or pin count will not connect. Cable length excluding connectors is 75 mm.
Highlights
- Delivers up to DC 5V 2A shared power for charging devices
- 75 mm cable with 2.54 mm pitch header fits tight DIY builds
- Latch-mount female sockets secure Type-A and Type-C connections inside cabinets
- Reversible Type-C plug inserts either way for quick hookup
- Supplies power only to phones, tablets, laptops and other USB peripherals
Specifications
| Brand | Vszerda |
|---|---|
| Color | Black |
Questions about this item
Does the cable get warm when delivering 2A continuously?
The assembly is rated for DC 5V 2A shared across both ports and carries only power lines, so heat remains minimal during sustained use.
What header does my board need for the 2.54mm pitch connector?
A standard 2-pin 2.54mm pitch header on the motherboard or controller board is required for the latch-mount end to seat securely.
Will this work with a USB 2.0 Type-A port on an older PC case?
Yes, the female Type-A socket follows the USB 2.0 specification and supplies up to 2A when paired with a compatible 5V source.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



