Vszerda
Vszerda TPN-DA21 19.5V 10.3A 200W AC Adapter laptop charger
200W AC adapter delivering 19.5V at 10.3A with 4.5 x 3.0 mm centre-pin plug for HP OMEN 15 and ZBook 17 G3-G5 laptops
- 200 W output powers demanding HP OMEN and ZBook laptops
- 5 V 10.3 A delivery matches original TPN-DA21 specification
- 5 mm centre-pin connector fits listed HP models directly
- 100-240 V input works on mains worldwide
- CE certified and supplied with a power cord
Vszerda 200W 19.5V Laptop AC Adapter
This new Vszerda AC adapter delivers 19.5 volts at 10.3 amps for a total of 200 watts. It replaces HP part numbers including TPN-DA21, TPN-LA21 and L73385-001. The unit accepts 100 to 240 volt input at 50 to 60 hertz and ships with a power cord and a 4.5 by 3.0 millimetre centre-pin connector.
For HP OMEN 15 and ZBook 17 G3 G4 G5 owners
The adapter matches the voltage, current and connector required by listed OMEN 15 and ZBook 17 G3, G4 and G5 models such as 15-DC0124TX. Buyers whose laptops need a different output voltage, a different current rating or a barrel size other than 4.5 by 3.0 millimetres should look elsewhere.
200W 19.5V 10.3A output with 4.5x3.0mm tip
The single specification that decides fit is the 19.5 volt 10.3 amp 200 watt output combined with the 4.5 by 3.0 millimetre centre-pin plug. If your device demands those exact electrical values and that connector geometry, this adapter is the correct part.
Highlights
- 200 W output powers demanding HP OMEN and ZBook laptops
- 5 V 10.3 A delivery matches original TPN-DA21 specification
- 5 mm centre-pin connector fits listed HP models directly
- 100-240 V input works on mains worldwide
- CE certified and supplied with a power cord
Specifications
No published specifications for this item yet.
Questions about this item
Does the 4.5 x 3.0 mm centre-pin connector fit my HP OMEN 15 or ZBook 17 G3/G4/G5?
Yes, the adapter uses a 4.5 x 3.0 mm barrel plug with a centre pin that matches the charging port on those models.
What is the correct way to connect the 200 W adapter so the laptop recognises the full 19.5 V 10.3 A output?
Plug the AC cord into the brick first, then into the wall outlet, and finally insert the barrel plug firmly until the centre pin seats — skipping the brick-first step often leaves the laptop on low-power mode.
When should I replace the EU/US/UK/AU power cord that ships with the 200 W unit?
Replace the cord if the plug pins are bent, the insulation is cracked, or the connector becomes loose at the brick — any of those signs mean the cord can no longer carry 10.3 A safely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



