We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PCIe x1 network card with single RJ45 port and low-profile bracket

Vszerda

Vszerda SY-PEX24076 2.5 Gbps PCIe network card

SKU CH-62H5-HF4PA

Adds a 2.5 Gbps RJ45 Ethernet port over a PCIe x1 slot using the Intel I225 controller with TSN, RSS and 9.5 KB jumbo frames

  • Speed2.5 gigabits_per_second
  • Interfacepci_express_x1
  • BUSpci_express_x1
  • FeaturesDesktop
  • Dimensions1.0 in x 5.5 in x 4.0 in
  • Weight0.1763698096 lb
  • 5 Gbps Ethernet for faster wired transfers
  • Intel I225 chipset offloads checksum and segmentation tasks
  • PCI Express x1 slot fits most desktop motherboards
  • Low-profile bracket included for slim chassis builds
  • TSN and Jumbo Frame support for time-sensitive applications

2.5 Gbps PCIe Network Card

The Vszerda SY-PEX24076 adds a single 2.5 Gigabit Ethernet port to a desktop through a PCI Express x1 slot. It uses the Intel I225 controller for multi-gigabit copper networking up to 2.5 Gbps. The card includes a low-profile bracket for small-form-factor chassis. Driver media is supplied in the box.

PCI Express x1 Interface

The card requires an available PCI Express x1 slot and is not compatible with legacy PCI slots. It negotiates speeds of 10, 100, 1000 and 2500 Mbps over standard RJ45 cabling. The Intel I225 chipset handles checksum offload, TCP segmentation and Jumbo Frames up to 9.5 KB. Advanced interrupt handling reduces CPU overhead on multi-core systems.

Desktop Expansion with Low-Profile Fit

Measuring 1.0 by 5.5 by 4.0 inches, the board fits tight builds when the included 8 cm bracket is fitted. Time Sensitive Networking features such as IEEE 802.1AS-REV and 802.1Qbv are supported on select operating systems. The single-port design suits users adding one high-speed wired link. Builders needing multiple ports or fibre connectivity should look elsewhere.

Highlights

  • 5 Gbps Ethernet for faster wired transfers
  • Intel I225 chipset offloads checksum and segmentation tasks
  • PCI Express x1 slot fits most desktop motherboards
  • Low-profile bracket included for slim chassis builds
  • TSN and Jumbo Frame support for time-sensitive applications

Specifications

BrandIO Crest
ModelSY-PEX24076
Part NumberSY-PEX24076
Speed2.5 gigabits_per_second
Interfacepci_express_x1
BUSpci_express_x1
FeaturesDesktop
Dimensions1.0 in x 5.5 in x 4.0 in
Weight0.1763698096 lb

Questions about this item

What does 2.5 Gbps mean for actual file-transfer speed on this card?

The card negotiates 2.5 Gbps over standard copper cabling, so sustained throughput is limited by the 2.5 Gbps line rate and system overhead rather than a higher ceiling.

Which PCIe generation and lane width does the SY-PEX24076 use, and what bandwidth does that provide?

It uses a PCI Express x1 link; the slot generation of the motherboard determines the lane speed, and the single lane carries the 2.5 Gbps Ethernet traffic without saturation.

Will the low-profile bracket let this card fit in a slim 1U chassis?

The bundle includes an 8 cm low-profile bracket, and the board measures 1.0 in by 5.5 in, dimensions that match typical half-height, half-length slots in 1U systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.