We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black frame 120 by 120 by 38 mm with visible blades and two wires

Vszerda

Vszerda SP100A-1123XST.GN 115V AC 120x120x38mm case fan 1800 RPM 50 dB 2-Pin

SKU CH-NVVD-VK4XW MPN SP100A-1123XST.GN

115 V AC axial fan, 120 × 120 × 38 mm, 1800 RPM, 50 dB, two-pin connector

  • 115 V AC power for direct mains connection
  • 1800 RPM airflow at 50 dB noise
  • 120 mm square frame fits standard mounts
  • 38 mm thickness for high-static-pressure cooling
  • 2-pin connector enables simple installation

Replacement cooling fan for industrial equipment

This Vszerda SP100A-1123XST.GN is a 115V AC axial fan built to replace damaged cooling units in servers, workstations and other enclosures. It matches the original Sunon part number and fits the same 120x120x38mm mounting footprint. Installers should verify the part number against the confirmation picture before fitting.

115V AC voltage and 2-pin power connector

The fan operates on 115 volt alternating current at 50/60Hz and draws 0.26/0.24A depending on line frequency. A two-pin connector supplies power directly from mains-rated wiring. No PWM or voltage-control wire is present, so speed is fixed at the rated value.

1800 RPM airflow at 50 dB and 2 watts

At full speed the rotor turns at 1800 RPM while consuming approximately 2 watts of power. The supplier rates acoustic output at 50 dB under normal running conditions. This noise level suits equipment rooms or rack cabinets where moderate background sound is acceptable.

Highlights

  • 115 V AC power for direct mains connection
  • 1800 RPM airflow at 50 dB noise
  • 120 mm square frame fits standard mounts
  • 38 mm thickness for high-static-pressure cooling
  • 2-pin connector enables simple installation

Specifications

No published specifications for this item yet.

Questions about this item

What does 1800 RPM mean for actual airflow inside a case?

At 1800 RPM the fan moves a moderate volume of air through a 120 mm frame, suitable for general chassis ventilation or spot cooling on a heatsink.

The fan runs on 115 V AC at 50/60 Hz — what does that cap in practice?

It ties the fan to mains voltage, so speed is fixed at 1800 RPM and cannot be PWM-controlled or voltage-regulated by a motherboard header.

Will the 120x120x38 mm frame and 2-pin lead fit my standard 120 mm mount?

Yes, the 120 mm square footprint matches common case mounting holes, but the 38 mm thickness needs clearance and the 2-pin plug requires a 115 V AC source, not a 12 V DC header.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.