Vszerda
Vszerda Slimline MCIO 8i 74Pin Male to MCIO PCIE 5.0 4.0 74Pin Male Extender Cord 50cm infiniband cable
Slimline SFF-8654 74-pin male-to-male extender cable supporting SAS 3.0/4.0, PCIe Gen 3/4/5 and 25G Ethernet at 24 Gbps over 50 cm
- TypeEthernet
- ColorBlack
- Connector Number74
- Connector DetailMcio
- Terminal GenderMale-to-Male
- Speed24 gigabits_per_second
- Fast 24 Gbps transfer for SFF-8654 SSDs
- 74-pin male-to-male link extends reach by 50 cm
- Supports SAS 3.0 and 4.0 with PCIe Gen 5.0
- Multi-protocol ready for 25 G Ethernet and 56 GT/s PAM4
- Mini Cool Edge IO design fits dense server chassis
50 cm MCIO 74-pin extender for SSDs
This 50 cm cable connects two SFF-8654 74-pin male MCIO ports, extending reach inside servers or workstations. It is built for SSDs and other devices that use the Mini Cool Edge IO interface and supports data rates up to 24 Gbps. The black male-to-male assembly is ready to use without tools.
Suits builders linking MCIO drives to backplanes
It fits administrators who need a short, high-speed link between compatible SAS 3.0 or 4.0 devices and a motherboard or controller equipped with MCIO 74-pin headers. Users requiring a different connector pitch, a longer run, or a female termination should look at other cable types.
Check your ports and protocol before ordering
Verify that both ends of your connection use SFF-8654 74-pin male MCIO sockets and that your hardware negotiates SAS 3.0, 4.0, PCIe Gen 3, 4, or 5, or 25 Gbps Ethernet with 56 GT/s PAM4 signalling. Confirm the 50 cm length clears your chassis routing.
Highlights
- Fast 24 Gbps transfer for SFF-8654 SSDs
- 74-pin male-to-male link extends reach by 50 cm
- Supports SAS 3.0 and 4.0 with PCIe Gen 5.0
- Multi-protocol ready for 25 G Ethernet and 56 GT/s PAM4
- Mini Cool Edge IO design fits dense server chassis
Specifications
| Brand | xiwai |
|---|---|
| Type | Ethernet |
| Color | Black |
| Connector Number | 74 |
| Connector Detail | Mcio |
| Terminal Gender | Male-to-Male |
| Speed | 24 gigabits_per_second |
| Specifications | Ethernet |
Questions about this item
What SFF-8654 MCIO 74-pin devices must I already have to use this 50 cm male-to-male extender?
You need two components each equipped with an SFF-8654 74-pin MCIO receptacle — for example a host adapter and an SSD backplane — so the cable can bridge them.
Will this cable carry 24 Gbps SAS 4.0 traffic if my existing backplane only supports SAS 3.0?
The cable is rated for SAS 3.0 and 4.0; it will operate at the highest speed both ends negotiate, so a SAS 3.0 backplane will run at its native rate.
How can I verify the link is running at the expected 24 Gbps after installation?
Check the host adapter or switch management utility for a negotiated link speed of 24 Gbps and confirm error counters remain at zero during data transfer.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115349BTC
In stock
