We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40cm Slim SAS 4i 38pin male-to-male cable with SFF-8654 connectors

Vszerda

Vszerda Slim SAS 4i 38pin to Slim SAS 4i 38pin Cable 40cm 24Gbps

SKU CH-JWAV-DDB3E

Connects Slim SAS 4i 38-pin devices at 24 Gbps over a 40 cm shielded cable for servers and storage

  • TypePCI-E
  • ColorBlack
  • Length1.6
  • Connector Number38
  • Connector DetailSff-8654
  • Terminal GenderMale-to-Male
  • 24 Gbps per channel for high-throughput storage
  • 40 cm length fits tight server chassis
  • Slim SAS 4i 38-pin connectors at both ends
  • Male-to-male SFF-8654 design enables direct backplane-to-controller links
  • Shielded assembly meets SAS 4.0 signal integrity requirements

Slim SAS 4i 38pin Cable 40cm

The Vszerda Slim SAS 4i 38pin cable connects a host controller to a target device using SFF-8654 connectors. It is built for internal server, data storage and workstation installations. The 40 cm length suits compact chassis layouts.

Fits SFF-8654 4i ports only

This assembly serves builds that need a straight Male-to-Male link between two Slim SAS 4i ports. Systems that require a different connector style, a longer reach or an external interface will need another cable.

24 Gbps per channel

Each of the four channels carries 24 Gbps for SAS and 8 GT/s for PCIe, meeting the SAS 4.0 and PCIe Gen 3 specifications. The shielding is rated for high-speed operation.

Highlights

  • 24 Gbps per channel for high-throughput storage
  • 40 cm length fits tight server chassis
  • Slim SAS 4i 38-pin connectors at both ends
  • Male-to-male SFF-8654 design enables direct backplane-to-controller links
  • Shielded assembly meets SAS 4.0 signal integrity requirements

Specifications

BrandVszerda
TypePCI-E
ColorBlack
Length1.6
Connector Number38
Connector DetailSff-8654
Terminal GenderMale-to-Male
Speed24 gigabits_per_second
SpecificationsPCI-E
ShieldingHigh Speed
FeaturesHigh Speed

Questions about this item

How do I install the 38-pin SFF-8654 connectors and what step do people miss?

Align the keyed SFF-8654 plug with the receptacle on the controller and backplane, then push straight in until the latch clicks; the step often missed is verifying both latches are fully seated before routing the 40cm cable.

What maintenance or replacement will this cable need later?

No scheduled maintenance is required; replace the assembly only if the 38-pin connectors show bent pins, the shielding is kinked, or signal errors appear at 24Gbps.

What limit appears first under sustained 24Gbps use?

The 40cm length and 1.6mm wire gauge set the practical limit; signal integrity degrades before thermal limits if the cable is bent tighter than the specified radius.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.