We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda Shuole 3xy USB 2.0 to IDE SATA adapter with power supply

Vszerda

Vszerda Shuole 3xy USB 2.0 to IDE SATA Adapter 480Mbps hard drive adapter

SKU CH-Y851-2FRCV

Connects 2.5-inch and 3.5-inch IDE or SATA drives to USB 2.0 at 480 Mbps with included power adapter

  • Connects 2.5" IDE laptop drives without external power
  • Supports 3.5" IDE desktop drives with included power adapter
  • Reads 5.25" IDE optical drives for legacy media access
  • Works with 2.5" and 3.5" SATA drives via USB 2.0
  • Transfers data at up to 480 Mbps over USB 2.0

Universal IDE and SATA Drive Adapter

The Vszerda Shuole 3xy adapter connects legacy IDE and current SATA storage to a USB 2.0 host. It supports 2.5 inch and 3.5 inch IDE hard disks with 44/43 or 40/39 pin interfaces. It also reads 5.25 inch IDE optical drives and 2.5 inch or 3.5 inch SATA hard disks and SSDs. The 480 Mbps USB 2.0 link is suited for data recovery, archiving or cloning older media.

Check Drive Type and Power Before Ordering

Verify whether your drive uses a 44/43 pin 2.5 inch IDE, a 40/39 pin 3.5 inch IDE or a 7+15 pin SATA connector. The adapter draws bus power only for a 2.5 inch IDE hard disk; every other drive type requires the included external power supply. Ensure you have a free USB 2.0 port and a mains outlet for the power brick when connecting desktop drives or optical units.

Compact Build with Dedicated Power Input

The adapter body is a small plastic enclosure with clearly labelled IDE and SATA sockets on opposite edges. A barrel jack accepts the supplied power adapter for desktop and optical drives. Cables run straight from the sockets, so allow a few centimetres of clearance behind the connected drive. The USB 2.0 plug is fixed, keeping the link simple for occasional bench use.

Highlights

  • Connects 2.5" IDE laptop drives without external power
  • Supports 3.5" IDE desktop drives with included power adapter
  • Reads 5.25" IDE optical drives for legacy media access
  • Works with 2.5" and 3.5" SATA drives via USB 2.0
  • Transfers data at up to 480 Mbps over USB 2.0

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter include the optional 2.5-inch SATA cable or must it be bought separately?

The 2.5-inch SATA special cable is not included and must be purchased separately if you need to connect a 2.5-inch SATA drive.

Which drive sizes and pin counts does the adapter support for IDE and SATA connections?

It supports 2.5-inch IDE at 44/43 pins, 3.5-inch IDE at 40/39 pins, 5.25-inch IDE optical drives at 40/39 pins, and 2.5-inch and 3.5-inch SATA drives using 7+15 pin connectors.

What does the 480Mbps USB 2.0 rating mean for actual transfer speeds with IDE or SATA drives?

The 480Mbps figure is the USB 2.0 interface ceiling; real-world throughput will be lower and limited by the drive's own speed and the need for the external power adapter on most connections.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.