We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal HD Mini SAS SFF-8643 male to four SATA female connectors, 50 cm woven mesh ribbon cable with P1-P4 markers

Vszerda

Vszerda SFF86434SATA50CM Internal 12G HD Mini SAS SFF-8643 to 4 SATA cable

SKU CH-BE5W-CJWNV

Connects a 12Gbps RAID controller with SFF-8643 to four SATA drives over a 1.64ft cable with latch connectors

  • Connects 12 Gbps RAID controller to four SATA drives
  • 36-pin SFF-8643 host connector with latch locking
  • Four SATA target connectors with stainless steel latches
  • 50 cm length with woven mesh sheath for routing
  • Compatible with Adaptec 71605 and 7895 controllers

Connection scheme

This cable links a 12 Gbps RAID controller that uses the SFF-8643 host port to four individual SATA drives or backplane slots. It is built for server or workstation builders who need to break out a single high-density connector into multiple drive connections.

Thermals and power

The assembly uses slim ribbon conductors wrapped in acetate cloth tape and a woven mesh sheath over half the length to reduce bulk and improve airflow inside dense chassis. No active cooling or external power is required because the cable carries only data signals between the controller and the target drives.

Build integration

The forward-pinout design with 36-pin SFF-8643 male and four 7-pin SATA female connectors fits Adaptec RAID 71605 and 7895 storage controllers. At 1.64ft the 50 cm length reaches typical drive cages without excess slack, and P1 to P4 markers simplify port identification after installation.

Highlights

  • Connects 12 Gbps RAID controller to four SATA drives
  • 36-pin SFF-8643 host connector with latch locking
  • Four SATA target connectors with stainless steel latches
  • 50 cm length with woven mesh sheath for routing
  • Compatible with Adaptec 71605 and 7895 controllers

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the SFF-8643 connector and which step do people miss?

Insert the 36-pin SFF-8643 male connector into the host controller until the latch clicks, then attach the four 7-pin SATA female ends to the drives; the step often missed is confirming each SATA latch is fully seated.

What maintenance or replacement will the Vszerda SFF86434SATA50CM cable need later?

The woven mesh sheath and acetate cloth tape protect the slim ribbon cables from strain; inspect latches and sheathing periodically and replace the cable if any latch fails to lock or the sheathing frays.

What limit appears first under sustained use with this 12 Gbps HD Mini SAS cable?

Each SATA lane is rated at 6 Gbps, so sustained throughput per drive caps at 6 Gbps even though the SFF-8643 host side supports 12 Gbps aggregate bandwidth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.