Vszerda
Vszerda SFF-8654 8i 74Pin to Dual Oculink SFF-8611 SAS Slim 4.0 Cable 50cm
Connects a Slimline SFF-8654 8i 74pin backplane to dual Oculink SFF-8611 controllers at 24Gbps per channel over 50cm
- Connects backplanes to controllers via SFF-8654 to dual Oculink
- Supports 24 Gbps SAS and 8 GT/s PCIe per channel
- Meets SAS 4.0 and Ultraport SlimSAS specifications
- Four-channel signal transmission in a compact design
- 50 cm length fits server and workstation chassis
Internal connectivity for dense server builds
This cable links a backplane with an SFF-8654 8i 74pin connector to a controller equipped with dual Oculink SFF-8611 ports. It suits servers, data storage arrays and workstations that use the PCIe Slimline SAS Slim 4.0 standard. The 50 cm length fits typical chassis routing distances.
PCIe Gen3/4 and SAS 4.0 define the speed ceiling
Each of the four channels carries up to 24 Gbps for SAS traffic and 8 GT/s for PCIe traffic. The interface specifications set the maximum throughput; actual performance depends on the connected controller and backplane capabilities.
Dual SFF-8611 ends decide the controller match
The cable terminates in two Oculink SFF-8611 connectors, so the host controller must present matching ports. If your controller uses a different connector type, this assembly will not fit.
Highlights
- Connects backplanes to controllers via SFF-8654 to dual Oculink
- Supports 24 Gbps SAS and 8 GT/s PCIe per channel
- Meets SAS 4.0 and Ultraport SlimSAS specifications
- Four-channel signal transmission in a compact design
- 50 cm length fits server and workstation chassis
Specifications
No published specifications for this item yet.
Questions about this item
Which length suits my chassis — the 50cm or 100cm version?
The cable assembly is 50cm long, matching the product name and the specification sheet.
What does the 24Gbps per channel rating deliver in a live server?
Each of the four lanes carries up to 24Gbps for SAS 4.0 traffic or 8GT/s for PCIe Gen3/4, giving four independent high-speed paths between the backplane and controller.
How does the SFF-8654 to dual SFF-8611 interface limit performance?
The Slimline SFF-8654 8i 74pin connector splits to two SFF-8611 Oculink ports, capping each lane at the SAS 4.0 and PCIe Gen3/4 rates defined in the specification.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115093BTC
In stock
