We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda SFF-8654 8i 74-pin to dual SFF-8611 OCuLink SAS 4.0 cable, 100 cm

Vszerda

Vszerda SFF-8654 8i 74Pin to Dual Oculink SFF-8611 SAS 4.0 Cable 100 cm

SKU CH-BZ62-P682K

Connects a SFF-8654 74-pin backplane to dual SFF-8611 OCuLink ports at 24 Gbps per channel for SAS 4.0

  • Connects Slimline SFF-8654 backplanes to dual Oculink SFF-8611 controllers
  • 24 Gbps per channel for SAS 4.0 data throughput
  • 100 cm length suits server and workstation chassis
  • Smaller connector design saves internal device space
  • Four-channel signal transmission meets industry specifications

Connector and cable type

This cable bridges a Slimline SFF-8654 8i 74pin connector to two SFF-8611 Oculink connectors. It is designed for internal links between a backplane and a controller in servers, data-storage arrays and workstations. The assembly meets SAS 4.0 and PCIe Gen3/4 specifications.

Setup checks before ordering

Confirm your backplane presents a Slimline SFF-8654 8i 74pin port and your controller offers two SFF-8611 Oculink ports. Verify the 100 cm length fits the internal routing path in your chassis. Ensure the system supports SAS 4.0 or PCIe Gen3/4 signalling for the intended device.

Who this suits and who should look elsewhere

Builders needing a 100 cm Slimline-to-dual-Oculink link for SAS 4.0 or PCIe Gen3/4 backplanes will find this cable fits. Users requiring a different connector combination, a shorter or longer reach, or a protocol not listed here should look elsewhere.

Highlights

  • Connects Slimline SFF-8654 backplanes to dual Oculink SFF-8611 controllers
  • 24 Gbps per channel for SAS 4.0 data throughput
  • 100 cm length suits server and workstation chassis
  • Smaller connector design saves internal device space
  • Four-channel signal transmission meets industry specifications

Specifications

No published specifications for this item yet.

Questions about this item

What connectors are on the cable and do I need anything else to use it?

The cable has one SFF-8654 8i 74pin connector on one end and two SFF-8611 Oculink connectors on the other. No additional parts are included or required for the connection itself.

Which length should I choose for my server build?

This cable is 100 cm long. Choose this length if the distance between your Slimline backplane and Oculink controller requires up to one metre of routing.

What does the 24 Gbps SAS speed mean for my drives?

Each of the four channels supports 24 Gbps SAS 4.0 signalling, so the cable can carry the full bandwidth of modern SAS SSDs or HDDs without bottlenecking the link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.