We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal Mini SAS HD SFF-8643 to four SFF-8482 connectors with 15-pin power

Vszerda

Vszerda SFF-8643 Mini SAS HD to 4× SFF-8482 29-pin with 15-pin power 12Gb/s cable

SKU CH-1Q3Q-JNZAF

Connects a 12Gb/s SAS controller to four 29-pin SAS/SATA drives with integrated 15-pin power

  • Connect a SAS controller to four drives via single SFF-8643 port
  • 12 Gb/s bandwidth supports high-throughput storage arrays
  • Integrated 15-pin power connector supplies drives directly
  • Fan-out design splits one x4 link into four x1 SFF-8482 targets
  • Compatible with SATA and SAS disks using 29-pin connectors

SFF-8643 to 4× SFF-8482 fan-out cable

This cable connects a SAS controller with an SFF-8643 port to four SATA or SAS drives using SFF-8482 connectors. It is intended for builders adding direct-attached storage to a server or workstation. The 12 Gb/s rating supports current SAS and SATA speeds. Buyers who need to connect drives to a backplane SFF-8643 port cannot use this cable.

Build quality and daily connector use

The assembly terminates in four 29-pin SFF-8482 plugs and a single SFF-8643 host plug with a 15-pin power port. The fan-out design keeps cable routing tidy inside a chassis. The SFF-8643 end must attach to a controller or motherboard port; it will not function when plugged into a backplane.

Bundled power port and compatibility

A 15-pin power connector is integrated on the host side so the controller can supply drive power through the same cable. No additional adapters or software are included. The cable works with any SAS controller that presents an SFF-8643 interface and drives that accept SFF-8482 connections.

Highlights

  • Connect a SAS controller to four drives via single SFF-8643 port
  • 12 Gb/s bandwidth supports high-throughput storage arrays
  • Integrated 15-pin power connector supplies drives directly
  • Fan-out design splits one x4 link into four x1 SFF-8482 targets
  • Compatible with SATA and SAS disks using 29-pin connectors

Specifications

No published specifications for this item yet.

Questions about this item

What does the 12Gb/s SFF-8643 interface cap in real use?

The SFF-8643 host connector supports 12Gb/s SAS signalling, so each of the four lanes can reach that speed when the controller and drives also run at 12Gb/s.

What clearance and connectors does the cable need to fit?

It needs a free SFF-8643 port on the controller, four SFF-8482 29-pin drive bays, and a 15-pin SATA power plug from the PSU for the power port.

How is the cable installed and which step is often missed?

Plug the SFF-8643 end into the RAID card or motherboard, attach the four SFF-8482 ends to the drives, then connect the 15-pin power port — forgetting the power connection is the common mistake.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.