We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin black cable with 29-pin SAS connectors at each end

Vszerda

Vszerda SFF-8482 SAS 29Pin Male to Female Extension Cable 0.5m

SKU CH-CRJN-MBHMS

A 0.5 m SAS extension cable with 29-pin SFF-8482 male-to-female connectors for drives, carrying 6 Gb/s over copper conductors

  • TypeSAS
  • Length1.6 feet
  • Connector DetailSas
  • Terminal GenderMale
  • Speed6 gigabits_per_second
  • ConductorCopper
  • Extends SAS drive reach with .5 metre male-to-female cable
  • 29-pin SFF-8482 connector delivers power and dual-lane data
  • 6 Gbps throughput supported by copper conductors
  • 26 AWG UL2725 jacket meets RoHS compliance
  • Compatible with SAS hard drives and SAS SSDs

SAS 29-pin extension for drive connectivity

This Vszerda cable extends an SFF-8482 connection by 0.5 metres using a male-to-female layout. It carries both power and data through a single 29-pin interface designed for SAS hard drives and SAS SSDs. The copper conductors are rated for 6 gigabits per second across two SAS lanes. A UL2725 26AWG jacket provides durability and RoHS compliance.

Replaces short factory cables in tight chassis

The half-metre length bridges the gap when a backplane or controller port sits just beyond the reach of the original drive lead. It is worth adding when cable routing around large coolers or power supplies forces a sharper bend than the stock cable allows. Builders who need longer runs or right-angle connectors will not find those options here.

Fits standard SAS drive bays and controllers

The plastic-body SFF-8482 plugs into any compatible drive backplane, HBA or RAID card without adapters. Fifteen pins handle drive power while two groups of seven pins carry the differential signal pairs. The slim 26AWG profile eases routing in dense enclosures, though the fixed straight connectors may still challenge extremely cramped drive cages.

Highlights

  • Extends SAS drive reach with .5 metre male-to-female cable
  • 29-pin SFF-8482 connector delivers power and dual-lane data
  • 6 Gbps throughput supported by copper conductors
  • 26 AWG UL2725 jacket meets RoHS compliance
  • Compatible with SAS hard drives and SAS SSDs

Specifications

Brandchenyang
ModelCY-SF-062-0.5M
TypeSAS
Length1.6 feet
Connector DetailSas
Terminal GenderMale
Speed6 gigabits_per_second
ConductorCopper
FeaturesSFF-8482

Questions about this item

Will the 29-pin SFF-8482 male connector fit my SAS drive's power and data ports?

Yes, the SFF-8482 male end carries 15 power pins and two groups of 7 signal pins that match the drive's combined power and SAS interface.

Do I need to align a key or latch when plugging the SFF-8482 male end into the backplane?

Insert the male connector straight into the female port until the plastic body seats fully; the keyed shape prevents reversed insertion.

When should I replace this 0.5 m SAS extension cable?

Replace it if the jacket shows cracks, the 26 AWG copper conductors feel loose in the plug, or data errors appear on the 6 Gb/s link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.