Vszerda
Vszerda SFF-8482 SAS 22 Pin to 7 Pin + 15 Pin SATA Adapter 90 Degree
Right-angled adapter converts an SFF-8482 SAS 22-pin connector to a 7-pin SATA data and 15-pin power connection for compatible controllers
- TypeSATA
- ColorBlack
- FeaturesRight Angled 90 Degree
- Right-angled 90° design eases routing in tight chassis
- 22-pin SFF-8482 connector mates with SAS HDDs and SSDs
- 15-pin power segment supplies drive voltage directly
- 7-pin SATA data link connects to compatible SAS controller
- 29-pin SAS interface supports dual-lane SAS signalling
SAS-to-SATA adapter for RAID drives
This Vszerda adapter converts an SFF-8482 SAS 22-pin connection into a standard 7-pin SATA data link and a 15-pin power plug. It targets builders adding SAS hard drives or SAS SSDs to a motherboard or controller that already speaks SAS. The right-angled 90-degree body keeps the cable run tidy inside tight chassis. It does not bridge SAS drives to ordinary SATA-only ports.
No thermal or power concerns
The unit is a passive cable assembly with no active components, so it generates no heat and draws no power of its own. Noise is non-existent because there are no fans or moving parts. The 15-pin section simply passes through the drive's existing power requirements from the host supply.
Fits tight bays, frees straight connectors
The 90-degree SFF-8482 plug lets the cable exit parallel to the drive, clearing low-profile backplanes and crowded drive cages. You need a SAS-capable controller or motherboard with the appropriate chipset; a plain SATA host will not recognise the drive. Conversely, a SATA drive cannot attach to a pure SAS backplane through this adapter. The 29-pin SFF-8482 interface carries two SAS lanes to the drive.
Highlights
- Right-angled 90° design eases routing in tight chassis
- 22-pin SFF-8482 connector mates with SAS HDDs and SSDs
- 15-pin power segment supplies drive voltage directly
- 7-pin SATA data link connects to compatible SAS controller
- 29-pin SAS interface supports dual-lane SAS signalling
Specifications
| Brand | xiwai |
|---|---|
| Model | SF-095-XY |
| Type | SATA |
| Color | Black |
| Features | Right Angled 90 Degree |
Questions about this item
How do I install the right-angled SFF-8482 adapter in a tight case without bending the cables?
Align the 29-pin SFF-8482 end with the drive connector, press straight in until the plastic body seats fully, then route the 7-pin SATA and 15-pin power cables away from the 90-degree bend to avoid strain.
Will the 15-pin power connector need replacement after repeated drive swaps?
The 15-pin male power connector is rated for standard SATA mating cycles; replace the adapter if pins become loose or the plastic housing cracks from frequent insertion.
What throughput limit appears first when the SFF-8482 runs two SAS lanes continuously?
The 7-pin SATA data path and dual 7-pin SAS lanes share the adapter's signal traces, so sustained dual-lane SAS traffic hits the SATA connector's single-lane electrical ceiling first.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115078BTC
In stock
