We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black adapter cable with SFF-8639 and SFF-8612 connectors and SATA power lead

Vszerda

Vszerda SF-084-8612 U.2/U.3 SFF-8639 to Oculink SFF-8612 Adapter Cable

SKU CH-EBW6-QRFSK

Converts U.2/U.3 NVME SSDs to Oculink with 64Gbps PCIe 4.0/5.0 support and driver-free operation

  • Connector TypeSff-8639
  • Connector DetailSff-8639
  • Constructioncopper
  • Supports PCIe 4.0/5.0 NVMe at 64 Gbps
  • Driver-free operation with NVMe 1.2 protocol
  • Converts U.2/U.3 SFF-8639 to OCuLink SFF-8612
  • Copper construction maintains signal integrity
  • Works only with NVMe SSDs, not SATA/SAS

U.2/U.3 to Oculink adapter purpose

This adapter connects a U.2 or U.3 NVME SSD to an Oculink SFF-8612 port on a PC. It is built for users who need to add high-speed NVME storage without a native U.2 slot. The card does not support SATA or SAS SSDs, so buyers with those drive types must use a different solution.

Sustained signal integrity

The card transmits PCI Express 4.0 and 5.0 signals using the NVMe protocol at up to 64Gbps. It supports NVM Express 1.2 and does not alter the speed or other properties of the connected drive. Performance remains consistent because the adapter only converts the physical interface without signal processing.

Thermals noise and power

The passive copper construction adds no fans or active cooling, so it produces no noise. A SATA power cable supplies 5V and 12V to the drive, drawing power directly from the system. The lightweight PCB adds minimal thermal load inside the chassis.

Highlights

  • Supports PCIe 4.0/5.0 NVMe at 64 Gbps
  • Driver-free operation with NVMe 1.2 protocol
  • Converts U.2/U.3 SFF-8639 to OCuLink SFF-8612
  • Copper construction maintains signal integrity
  • Works only with NVMe SSDs, not SATA/SAS

Specifications

Brandchenyang
Connector TypeSff-8639
Connector DetailSff-8639
Constructioncopper

Questions about this item

Does the SF-084-8612 adapter cable generate noticeable heat or draw extra power when a U.2 NVME SSD runs continuously?

The adapter is a passive copper PCB that only converts the SFF-8639 form factor to Oculink SFF-8612. It adds no active components, so heat and power draw remain those of the SSD itself.

What host connector and power source must already be present for this adapter to work?

You need an available Oculink SFF-8612 port on the motherboard or add-in card and a free SATA power connector from the PSU to supply 5 V and 12 V to the drive.

Will a legacy SAS or SATA U.2 drive function through this adapter on an older backplane?

No. The card only works with U.2 or U.3 NVME SSDs; it does not support SAS or SATA protocol drives.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.