We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 1x8 PLC fiber splitter with eight SC UPC connectors on 0.9 mm pigtails

Vszerda

Vszerda SC UPC 1X8 PLC Singlemode Splitter 0.9mm G657A1 1260/1650nm 1M/3.3FT

SKU CH-CHQS-M2GHT

1×8 PLC single-mode splitter divides one fibre into eight with 10.5 dB insertion loss and 50 dB return loss across 1260–1650 nm, G.657A1 0.9 mm pigtail, SC/UPC connectors, 1 m length.

  • TypeFiber Optic
  • Connector NumberSC
  • Uniform splitting for consistent signal delivery
  • Low 10.5 dB insertion loss with 50 dB return loss
  • Wavelength-insensitive loss across 1260/1650 nm
  • Stainless steel housing protects splitter from -40 to 85 °C
  • SC UPC connectors on 0.9 mm G657A1 fiber for easy integration

SC UPC 1x8 Singlemode Splitter

The Vszerda SC UPC 1x8 PLC singlemode splitter divides one optical signal into eight equal paths for FTTH, LAN and telecom distribution. It uses G657A1 bend-insensitive fiber with 0.9 mm pigtails terminated in SC/UPC connectors. The planar waveguide operates across the 1260 nm to 1650 nm window.

Installers needing a compact 1-to-8 distribution

Technicians deploying passive optical networks or extending fiber to multiple endpoints will find the 1 m pigtail length convenient for splicing or direct patching. The module is not suited for multimode infrastructure, ribbon-fiber splicing or installations that require angled-polish connectors.

Insertion loss of 10.5 dB and return loss of 50 dB

These loss figures determine whether the link budget supports the planned split count and reach. The device is qualified from -40 °C to 85 °C and housed in a stainless-steel tube for mechanical protection.

Highlights

  • Uniform splitting for consistent signal delivery
  • Low 10.5 dB insertion loss with 50 dB return loss
  • Wavelength-insensitive loss across 1260/1650 nm
  • Stainless steel housing protects splitter from -40 to 85 °C
  • SC UPC connectors on 0.9 mm G657A1 fiber for easy integration

Specifications

BrandPoyiccot
TypeFiber Optic
Connector NumberSC

Questions about this item

What insertion loss should I expect from the 1x8 PLC splitter under continuous operation?

The splitter specifies an insertion loss of 10.5 dB across the 1260–1650 nm wavelength range.

How much heat does the stainless-steel boxed splitter generate when running all day?

The passive PLC device has no active components, so it produces negligible heat within its -40 to 85 °C operating range.

What fiber patch cords or pigtails must I already have to connect this SC UPC splitter?

You need singlemode G657A1 fiber with SC UPC connectors on the mating side to match the splitter's 0.9 mm pigtails.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.