Vszerda
Vszerda SC 1x8 PLC Splitter 0.9mm G657A1 1310-1550nm 1M/3.3ft
Singlemode SC 1x8 PLC splitter with 0.9 mm G657A1 fibre, 10.5 dB insertion loss and 50 dB return loss across 1310-1550 nm
- TypeFiber Optic
- Connector NumberSC
- Uniform 1×8 splitting with A-grade fiber cores for consistent signal delivery
- Low 10.5 dB insertion loss and 50 dB return loss via ceramic ferrules
- Wavelength-flat performance across 1310 nm and 1550 nm bands
- Industrial-grade operation from –40 °C to 85 °C in stainless steel housing
- Ready for home wiring, engineering projects and fiber LAN deployments
Vszerda SC 1x8 PLC Splitter
The Vszerda SC 1x8 PLC Splitter is a singlemode fibre-optic component that divides one input signal into eight equal outputs. It is intended for installers building FTTH drops, campus backbone links or enterprise LAN segments where a single fibre must serve multiple endpoints.
Pre-terminated SC pigtails for quick splicing
Each of the nine fibres arrives with a factory-polished SC connector on a 0.9 mm G657A1 pigtail, so the unit can be fusion-spliced or mechanically joined without field polishing. The stainless-steel housing protects the internal planar waveguide, yet the rigid tube can snag in tight duct bends if the 1 m / 3.3 ft tails are not dressed with slack loops before closure.
PLC wavelength flatness and loss budget
The planar waveguide operates across 1310 nm to 1550 nm with insertion loss of 10.5 dB and return loss of 50 dB, remaining stable from -40 °C to 85 °C. Because every split adds fixed attenuation, links that require more than eight drops or that run over extended distances will exceed the loss budget of this single-stage splitter.
Highlights
- Uniform 1×8 splitting with A-grade fiber cores for consistent signal delivery
- Low 10.5 dB insertion loss and 50 dB return loss via ceramic ferrules
- Wavelength-flat performance across 1310 nm and 1550 nm bands
- Industrial-grade operation from –40 °C to 85 °C in stainless steel housing
- Ready for home wiring, engineering projects and fiber LAN deployments
Specifications
| Brand | Poyiccot |
|---|---|
| Type | Fiber Optic |
| Connector Number | SC |
Questions about this item
How can I confirm the splitter is performing as specified after installation?
Measure insertion loss with an optical power meter at 1310nm and 1550nm; each of the eight outputs should read close to 10.5 dB and return loss should be 50 dB or higher.
What comes in the box and what must I source separately?
The package includes the 1x8 PLC splitter with SC connectors on 0.9 mm G657A1 pigtails, 1 m long; patch cords, enclosures and cleaning supplies are not included.
Which wavelength range and fiber type should I select for a typical FTTH deployment?
This single unit covers 1310–1550 nm on G657A1 bend-insensitive fiber, the standard choice for residential and enterprise single-mode networks.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011557BTC
In stock
