We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue rectangular circuit board adapter measuring 11.2 by 4.5 cm with Sata connectors and mounting hardware

Vszerda

Vszerda SATA to NGFF Adapter Blue 11.2 x 4.5 cm

SKU CH-AJD8-A5DN9

Converts a SATA drive to an M.2 NGFF slot with a compact 11.2 x 4.5 cm blue board

  • Converts M.2 NGFF SATA SSDs to standard SATA
  • Compact 11.2 x 4.5 cm blue PCB fits tight spaces
  • On-board capacitors and LDO regulator ensure stable operation
  • Low power draw and silent solid-state performance
  • Includes screws and nuts for secure mounting

SATA to NGFF adapter for M.2 SATA SSDs

This blue adapter converts a standard SATA connection to an M.2 NGFF slot, allowing a SATA-based M.2 solid-state drive to be used where a SATA interface is present. It includes filter capacitors and an LDO regulator chip for stable operation with low power consumption and no noise. The board measures 11.2 x 4.5 cm and ships with two screws and four nuts for secure mounting.

Suits builders adding M.2 SATA storage to a SATA

It is aimed at users who have a 2280 or similar NGFF SATA SSD and a free SATA header or cable, whether inside a desktop, a server or an external enclosure. The solid-state design resists shock and suits harsh environments where mechanical drives would fail. Buyers needing to connect a PCIe-based M.2 drive should look elsewhere, as this adapter only carries SATA signals.

SATA interface defines compatibility

The adapter presents a SATA interface to the host and an M.2 NGFF keying to the drive, so the drive must be a SATA protocol M.2 module. No PCIe lanes are routed through the board, and the onboard regulator manages power delivery from the SATA supply. Confirm the drive is a SATA M.2 device before purchase.

Highlights

  • Converts M.2 NGFF SATA SSDs to standard SATA
  • Compact 11.2 x 4.5 cm blue PCB fits tight spaces
  • On-board capacitors and LDO regulator ensure stable operation
  • Low power draw and silent solid-state performance
  • Includes screws and nuts for secure mounting

Specifications

No published specifications for this item yet.

Questions about this item

Will this blue adapter let me connect an NGFF SATA SSD to a motherboard that only has a standard SATA port?

Yes, the adapter converts an M.2 NGFF SATA drive to a regular SATA interface so it can be used with any board that provides a SATA data and power connection.

How can I verify the NGFF drive is recognised and performing correctly once the adapter is installed?

After fitting the drive and securing it with the supplied screws, the system BIOS or operating-system disk utility should list the SSD at its full capacity with normal SATA transfer rates.

Does the package include everything needed for installation or must I buy extra cables or brackets?

The box contains the blue adapter board measuring 11.2 x 4.5 cm, two mounting screws and four nuts; a standard SATA data cable and a SATA power lead from your power supply are required separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.