Vszerda
Vszerda SATA Power Y Splitter Cable 15 Pin Male to Dual Female 7 Inch 1 Pack
Turns a single SATA power connector into two 15-pin sockets for adding an SSD, hard drive or optical drive, using 18 AWG wire at 7 inches
- Turn one SATA power port into two for extra drives
- 7 inch / 20 cm length keeps cable runs tidy
- 18 AWG wire carries 3.3 V, 5 V and 12 V safely
- Powers 2.5 inch SSD, 3.5 inch HDD, DVD drive or PCIe card
- Single 15-pin male to dual 15-pin female connector design
What it is and who it is for
The Vszerda SATA Power Y Splitter Cable turns a single 15-pin SATA power connector into two female ports. It is designed for builders and upgraders who need to add a 2.5 inch SSD, 3.5 inch hard drive, DVD drive or PCIe Express card when the power supply has no spare SATA plugs.
The spec that decides fit
The splitter uses 18 AWG wire and carries 3.3V, 5V and 12V from the PSU across a 20 cm length. Verify that your power supply has enough spare capacity on its SATA rail before connecting additional drives.
How it fits the build
The 7 inch cable reaches nearby drive bays without excess slack, helping keep tower cable management tidy. It requires one free SATA power header on the PSU and provides two standard 15-pin female connectors for the target devices.
Highlights
- Turn one SATA power port into two for extra drives
- 7 inch / 20 cm length keeps cable runs tidy
- 18 AWG wire carries 3.3 V, 5 V and 12 V safely
- Powers 2.5 inch SSD, 3.5 inch HDD, DVD drive or PCIe card
- Single 15-pin male to dual 15-pin female connector design
Specifications
No published specifications for this item yet.
Questions about this item
What does the 7 inch length mean once the cable is inside a real machine?
At 7 inches or 20 cm the splitter reaches from a power supply SATA connector to two drives mounted in adjacent bays without excess slack.
How does the 15 pin SATA interface cap what the splitter can deliver in practice?
The 15 pin SATA connector carries 3.3 V, 5 V and 12 V from the PSU, so the splitter passes those same rails to both female ports.
What does the 18 AWG wire gauge require for the splitter to fit or mount properly?
The 18 AWG conductors are flexible enough to route behind drive cages and through standard cable-management grommets in a tower chassis.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



