We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two flat 20 cm SATA power Y splitters, 15 pin male to dual female, black PVC jacket

Vszerda

Vszerda SATA Power Y Splitter Cable 15 Pin Male to Dual Female 20cm 2pcs

SKU CH-KXGC-5E8J9

A 20 cm SATA power Y-splitter converts one 15-pin male connector into two female ports, supporting 3.3 V, 5 V and 12 V for drives and other SATA devices

  • TypeSATA
  • Connector DetailSata
  • Terminal GenderMale-to-Female
  • FeaturesTangle Free
  • Converts one 15-pin SATA power connector into two
  • Supports 3.3V, 5V, and 12V outputs for drives and PCI cards
  • 20 cm flat cable reduces clutter and improves chassis airflow
  • 18 AWG pure copper cores with PVC jacket for durable, stable power delivery
  • Plug-and-play installation adds a drive without altering the original power supply

SATA Power Splitter for Dual Drives

This Vszerda Y-cable converts one 15-pin SATA power connector into two, letting a single PSU lead feed both a hard drive and an SSD. The 20 cm flat ribbon keeps routing tidy inside tight chassis and adds no measurable voltage drop across the 18 AWG copper cores. Builders who need to power more than two SATA devices from one connector will need additional splitters or a PSU with more native leads.

Voltage Limits of the SATA Standard

Each leg carries the standard 3.3 V, 5 V and 12 V rails defined by the SATA power specification, so any compliant drive or PCIe add-in card receives the correct voltages. The splitter itself does not regulate or boost power; total draw is still limited by the single PSU connector and the 18 AWG wire gauge. Systems that load both outputs near the connector’s rated current should verify the PSU can sustain the combined demand.

Upgrade from Molex Adapters or Daisy-Chained Leads

Replacing bulky Molex-to-SATA dongles or chained extensions with this 70 g pair reduces cable bulk and improves airflow without re-wiring the power supply. The plug-and-play design needs no drivers and works the moment the system is off and the connector is seated. If the PSU already offers enough native SATA plugs, the splitter adds no benefit and simply introduces another connection point.

Highlights

  • Converts one 15-pin SATA power connector into two
  • Supports 3.3V, 5V, and 12V outputs for drives and PCI cards
  • 20 cm flat cable reduces clutter and improves chassis airflow
  • 18 AWG pure copper cores with PVC jacket for durable, stable power delivery
  • Plug-and-play installation adds a drive without altering the original power supply

Specifications

BrandYARCHONN
TypeSATA
Connector DetailSata
Terminal GenderMale-to-Female
FeaturesTangle Free

Questions about this item

How do I decide between the 20 cm cables and a longer option?

Each splitter is 20 cm long; the two‑pack gives two identical 20 cm Y‑cables so you can reach two devices from one PSU connector without excess slack.

What does the 15‑pin SATA connector actually deliver to my drive?

The 15‑pin male plug carries 3.3 V, 5 V and 12 V lines, and each female branch passes all three voltages to the attached HDD, SSD or optical drive.

Will the SATA power interface limit the current my drives can draw?

The cable uses 18 AWG pure copper conductors rated for standard SATA power loads, so it supports the normal current each 15‑pin device requires.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.