We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black circuit board adapter with SATA connectors and M.2 slot

Vszerda

Vszerda SATA 3 to M.2 NGFF SSD Adapter 7+5 Pin B Key 30/42/60/80mm Black

SKU CH-E5HM-PA96H

Converts M.2 NGFF SATA SSDs (2230, 2242, 2260, 2280) to 2.5in 6.0 Gbps SATA with B-key support

  • Converts M.2 NGFF SSDs to 2.5in SATA 6Gbps interface
  • Supports B key and B+M key SATA-based M.2 SSDs
  • Fits 2230, 2242, 2260 and 2280 form factors
  • Works with SATA 1.5, 3.0 and 6.0 Gbps revisions
  • High-capacity capacitors and LDO regulator for stable power delivery

SATA 3 M.2 NGFF B-Key Adapter

This adapter converts an M.2 NGFF SATA SSD into a standard 2.5in SATA 6 Gbps drive. It fits B-key and B+M key modules in 2230, 2242, 2260 and 2280 lengths. The board includes high-capacity filter capacitors and a high-power LDO regulator for stable operation. No drivers are required for the SATA interface.

Builders adding SATA M.2 storage to a 2.5in bay

It suits anyone installing a SATA-based M.2 NGFF drive into a laptop or desktop 2.5in slot. It does not support PCIe M.2 drives, so buyers needing that interface must choose a different adapter. The card draws power from the SATA 7+5 pin connector without extra cables. Installation is tool-free and reversible.

SATA 6 Gbps host interface with B-key support

The decisive specification is the SATA III 6.0 Gbps host connection combined with M.2 B-key and B+M key compatibility. This limits use to SATA protocol NGFF SSDs only. Supported drive lengths are 30, 42, 60 and 80 mm as listed. The 7+5 pin connector provides both data and power for the converted drive.

Highlights

  • Converts M.2 NGFF SSDs to 2.5in SATA 6Gbps interface
  • Supports B key and B+M key SATA-based M.2 SSDs
  • Fits 2230, 2242, 2260 and 2280 form factors
  • Works with SATA 1.5, 3.0 and 6.0 Gbps revisions
  • High-capacity capacitors and LDO regulator for stable power delivery

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter add any fan noise or heat when the SSD runs all day?

The adapter itself has no fan and is described as producing no noise; it uses high-capacity filter capacitors and a high-power LDO regulator chip for low power consumption.

What must I already own to use this Vszerda adapter?

You need a SATA-based M.2 NGFF SSD in B key or B+M key (2230, 2242, 2260 or 2280) and a free SATA 7-pin data plus 5-pin power connection from your motherboard or controller.

Will a 2242 M.2 SATA SSD work in this adapter alongside my older SATA II motherboard?

Yes, the adapter supports SATA revision I, II and III (1.5, 3.0 and 6.0 Gbps) and accepts 2242-length drives, so it will negotiate the slower link automatically.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.