Vszerda
Vszerda SATA 15-pin to 6-pin power cable 18cm
An 18 cm black cable converts a 15-pin SATA power connector to a 6-pin PCIe socket using 18 AWG wire
- Connects SATA power to 6-pin PCIe graphics cards
- 15-pin SATA male plugs into standard drive power connectors
- 18 cm cable reaches nearby GPU power sockets
- 18 AWG conductors carry GPU current loads
- 20 g lightweight adapter adds minimal case weight
SATA 15-pin to 6-pin adapter
This 18 cm cable converts a SATA power connector into a 6-pin PCIe plug for graphics cards. It is intended for builders whose power supply lacks native PCIe connectors. The 18AWG wiring carries the required current for the adapter. One cable is included in the package.
Build integration
The short 18 cm length keeps cable routing tidy inside compact cases. It draws power from an existing SATA lead on the power supply, freeing a PCIe slot for the graphics card. No additional connectors or adapters are required beyond the SATA source. The black insulation matches typical internal wiring.
Thermals and power
The 18AWG conductors are rated for the current a 6-pin PCIe connection demands. Under normal load the cable runs warm but within specification. Passive operation adds no fan noise to the system. Power draw depends entirely on the attached graphics card.
Highlights
- Connects SATA power to 6-pin PCIe graphics cards
- 15-pin SATA male plugs into standard drive power connectors
- 18 cm cable reaches nearby GPU power sockets
- 18 AWG conductors carry GPU current loads
- 20 g lightweight adapter adds minimal case weight
Specifications
No published specifications for this item yet.
Questions about this item
How long is the cable before voltage drop becomes an issue?
The 18cm length is intended for short internal runs, keeping voltage drop minimal for typical GPU power draw.
Does the adapter get hot or noisy when the graphics card runs at full load all day?
The 18AWG wires handle the current without active cooling, so the cable itself stays silent and only warms slightly under sustained load.
What power supply connector must I already have free to use this adapter?
You need an available 15-pin SATA power connector from your PSU to plug the adapter into.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



