We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black adapter cable with 15-pin SATA male plug and 4-pin Molex female socket

Vszerda

Vszerda SATA 15-pin male to IDE 4-pin female power adapter

SKU CH-AEZ0-0QFDP

Converts a 15-pin SATA power connector to a 4-pin Molex plug for IDE drives

  • TypeSATA
  • Connector TypeIde Sata
  • Connector Number19
  • Connector DetailIde Sata
  • Terminal GenderMale-to-Female
  • ConstructionCopper
  • Connect SATA power supplies to IDE drives using a 15-pin male to 4-pin female adapter
  • Add extra power outlets for hard drives and optical drives from a single Molex connector
  • Copper construction delivers reliable conductivity for stable power delivery
  • Compact 3.94 x 3.94 x 0.39 inch form factor fits tight drive bays easily
  • Lightweight 0.71 ounce cable adds minimal strain to power supply connectors

Power adapter for legacy drives

This Vszerda adapter connects a 15-pin SATA power lead from a power supply to a standard 4-pin Molex device such as an older hard drive or optical drive. It lets builders reuse existing power cables when adding legacy storage to a modern system. The male-to-female design plugs directly into the PSU and the drive without extra cables.

Connector gender and pin count

The adapter presents a 15-pin SATA male connector on one side and a 4-pin Molex female connector on the other. Copper construction carries power between the two standards. This single specification determines whether the part matches the power-supply lead and the drive socket in a given build.

Adds one legacy power outlet

Each unit converts one SATA power connector into one Molex outlet, so it comfortably handles a single IDE hard drive, SSD or optical drive. It runs out when a build needs more than one Molex device from the same SATA lead or when the power supply lacks a spare SATA connector.

Highlights

  • Connect SATA power supplies to IDE drives using a 15-pin male to 4-pin female adapter
  • Add extra power outlets for hard drives and optical drives from a single Molex connector
  • Copper construction delivers reliable conductivity for stable power delivery
  • Compact 3.94 x 3.94 x 0.39 inch form factor fits tight drive bays easily
  • Lightweight 0.71 ounce cable adds minimal strain to power supply connectors

Specifications

Brandchenyang
Model8541686021
TypeSATA
Connector TypeIde Sata
Connector Number19
Connector DetailIde Sata
Terminal GenderMale-to-Female
ConstructionCopper
FeaturesIDE to SATA Power Adapter

Questions about this item

What does the 15-pin SATA male connector on this adapter actually supply to an IDE drive?

The 15-pin SATA male end plugs into a SATA power port on the power supply and delivers the standard SATA power lines to the 4-pin Molex female connector for an IDE hard drive or optical drive.

Which interface standard governs the SATA side of this adapter and what does it limit in practice?

The SATA side follows the SATA power specification, so it can only provide the voltages and current defined by that standard to the attached IDE device.

What physical clearance does the 3.94 x 3.94 x 0.39 inch body need to fit inside a case?

The adapter occupies a 3.94-inch square footprint and is 0.39 inches thick, so it requires that much free space around the power-supply cable routing area.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.