We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Multicoloured Mini SAS cable, SFF-8654 74-pin to two OCulink 8611 38-pin, 90-degree locking connectors, 50 cm

Vszerda

Vszerda SAS4.0 SFF-8654 8i 74P to 2× OCulink 8611 4i 38P cable 50CM

SKU CH-E277-JT90C

Connects SAS 4.0 SFF-8654 8i controllers to dual OCulink 8611 4i devices with 90-degree locking connectors and 50 cm length

  • TypeMINI SAS
  • ColorMulticolored
  • Length18
  • Connector DetailSas Sff-8654 to Oculink 8611
  • Terminal GenderMale-to-Male
  • SpecificationsMINI SAS
  • Complies with SAS 4.0 and PCI-E 5.0 standards
  • 90-degree low-profile design fits tight server chassis
  • Locking latch connectors prevent accidental disconnection
  • 50 cm length enables flexible internal routing
  • OFC conductors with Aluminum Mylar shielding reduce EMI

Enterprise SAS 4.0 Cable

This Vszerda cable connects a single SFF-8654 8i 74P port to two OCulink 8611 4i 38P ports. It is built for enterprise servers and RAID controllers that require PCI-E 5.0 and SAS 4.0 compliance. The 50CM length suits internal chassis routing in dense storage systems.

Standard Limits

The assembly complies with PCI-E 5.0 and SAS 4.0 specifications for high-speed transfer. Signal integrity is maintained by high-purity OFC conductors and multi-layer Aluminum Mylar shielding against EMI. The 90-degree low-profile design fits tight spaces but fixes the connector orientation relative to the port.

Installation Notes

Male-to-male locking latches on both ends secure the link against vibration in rack environments. The 90-degree heads can block adjacent slots if the port layout is not checked first. The 18-inch overall length allows limited slack; measure the exact run between controller and backplane before ordering. Buyers needing a straight connector or a different split configuration cannot use this cable.

Highlights

  • Complies with SAS 4.0 and PCI-E 5.0 standards
  • 90-degree low-profile design fits tight server chassis
  • Locking latch connectors prevent accidental disconnection
  • 50 cm length enables flexible internal routing
  • OFC conductors with Aluminum Mylar shielding reduce EMI

Specifications

BrandST-JY
ModelLPSFF8654-8I74P-2POC11-4I38P
TypeMINI SAS
ColorMulticolored
Length18
Connector DetailSas Sff-8654 to Oculink 8611
Terminal GenderMale-to-Male
SpecificationsMINI SAS
ShieldingHigh-speed transfer, 90-degree design, locking latch connectors, premium shielding
FeaturesHigh-speed transfer, 90-degree design, locking latch connectors, premium shielding

Questions about this item

One SFF-8654 8i 74P cable or two separate OCulink 8611 4i 38P cables?

This single cable splits one SFF-8654 8i 74P port into two OCulink 8611 4i 38P ports, so you use one cable instead of two.

What does SAS 4.0 compliance mean for throughput on this cable?

The cable meets SAS 4.0 and PCI-E 5.0 specifications, so each lane runs at the standard rate and the 8-lane SFF-8654 side delivers full aggregate bandwidth to the two 4-lane OCulink 8611 ends.

Does the 90-degree low-profile SFF-8654 connector fit standard drive backplanes?

Yes, the 90-degree low-profile SFF-8654 74-pin male connector is built to mate with standard Slimline SAS receptacles on enterprise backplanes and RAID controllers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.