Vszerda
Vszerda SAS Cable SFF-8482 29 Pin to SATA 22Pin with 15 Pin Power 10cm
Connects a SAS drive with SFF-8482 port to a compatible hybrid controller, providing SATA 22-pin data and 15-pin power over a 10 cm copper cable
- Typesas 8482 adapter
- ColorRed Cable SAS29P-SATA7P+15P
- Connector DetailSas Sata
- Terminal GenderMale
- Speed6 gigabytes_per_second
- ConductorCopper
- Connect SAS HDD to hybrid controller via SFF-8482
- 10 cm cable keeps RAID enclosures tidy
- 29 pin SAS to 22 pin SATA plus 15 pin power
- Copper conductors support 6 Gb/s data rate
- Male terminals ensure secure SATA and SAS connections
Target Use
This adapter cable connects a SAS hard drive with an SFF-8482 29-pin interface to a SAS-compatible hybrid controller while delivering power through a 15-pin SATA connector. It suits technicians integrating enterprise SAS storage into systems that already expose a SAS-capable backplane or controller. The 10 cm length keeps routing tidy inside dense chassis.
Compatibility Limits
The cable works only when both the drive and the host controller speak native SAS; it cannot bridge a SAS drive to a standard SATA-only motherboard unless that board includes a SAS chipset, nor can it attach a SATA drive to a pure SAS backplane unless the drive itself carries a SAS chipset. Buyers who need cross-protocol connectivity between SAS and SATA domains without matching chipsets cannot use this part.
Installation Notes
The 29-pin SAS plug, 22-pin SATA data/power receptacle and 15-pin SATA power plug are all keyed male connectors that mate in a single orientation. Copper conductors support 6 Gb/s signalling. Misalignment or forced insertion can bend the dense 29-pin rows, and the short 10 cm reach leaves no slack for repositioning drives after the cable is seated.
Highlights
- Connect SAS HDD to hybrid controller via SFF-8482
- 10 cm cable keeps RAID enclosures tidy
- 29 pin SAS to 22 pin SATA plus 15 pin power
- Copper conductors support 6 Gb/s data rate
- Male terminals ensure secure SATA and SAS connections
Specifications
| Brand | CY |
|---|---|
| Model | HX-SF-088 |
| Type | sas 8482 adapter |
| Color | Red Cable SAS29P-SATA7P+15P |
| Connector Detail | Sas Sata |
| Terminal Gender | Male |
| Speed | 6 gigabytes_per_second |
| Conductor | Copper |
| Features | SAS SATA |
Questions about this item
What clearance does the 10 cm cable need between the SFF-8482 port and the drive bay?
The 10 cm length requires the SAS controller port and the SATA drive to sit within a few centimetres of each other inside the chassis.
Which connector must be seated first when installing the 29 pin SAS and 22 pin SATA ends?
Insert the 29 pin SAS plug into the controller firmly before attaching the 22 pin SATA connector to the drive, then add the 15 pin power lead.
When should the copper conductors be inspected or the cable replaced?
Check the copper conductors if the 6 gigabytes_per_second link drops or errors appear; replace the cable if the red jacket shows kinks or the pins feel loose.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115651BTC
In stock
