We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda SAS six SATA 7-pin male to six SATA 7-pin male cable 50cm

Vszerda

Vszerda SAS 6 SATA 7Pin Male to 6 SATA 7Pin Male 50cm sata cable

SKU CH-WC1S-EBTY4

Connects six SATA drives to a RAID controller with six SATA 7-pin ports over 50 cm

  • Connect six drives to one RAID controller with six SATA 7-pin connectors
  • Supports 6 Gb/s SATA specification for reliable data transfer
  • 50 cm cable length fits typical server chassis layouts
  • SAS-compatible connectors designed for 12 Gb/s next-generation speeds
  • Four SATA 7-pin cable configurations offer flexible drive routing

Internal SAS to SATA Cable

This Vszerda cable links a 6 SATA 7-pin host port to six individual SATA 7-pin device connectors. It is built for internal server or RAID deployments where multiple drives attach to a single controller. The 50 cm length fits standard chassis routing. The assembly meets the 6 Gb/s SATA specification for reliable data transfer.

For RAID Arrays and Drive Expansion

The cable suits administrators wiring six SATA drives to a matching 6-port RAID or HBA card. It also fits workstation builders adding a hot-swap backplane fed by one host connector. Buyers needing a single drive link or external eSATA connectivity should choose a different cable. Systems requiring 12 Gb/s SAS speeds need a dedicated SAS harness instead.

Six Drive Fan-Out From One Host Port

The defining specification is the six-to-six SATA 7-pin fan-out that connects up to 6 SATA drives from one host connector. This topology decides whether the cable matches your controller and backplane layout. The 6 Gb/s rating supports current SATA SSDs and HDDs. Connector geometry is fixed, so verify port spacing before installation.

Highlights

  • Connect six drives to one RAID controller with six SATA 7-pin connectors
  • Supports 6 Gb/s SATA specification for reliable data transfer
  • 50 cm cable length fits typical server chassis layouts
  • SAS-compatible connectors designed for 12 Gb/s next-generation speeds
  • Four SATA 7-pin cable configurations offer flexible drive routing

Specifications

No published specifications for this item yet.

Questions about this item

Does the cable include power connectors for the drives or only data connections?

The cable carries six SATA 7-pin data connectors at each end for host and target devices; power cables are not included and must be sourced separately.

Should I choose the 50 cm length or a different length for a standard server chassis?

The 50 cm length suits typical internal server layouts where the RAID controller and drive backplane are in close proximity.

Will the 6 Gbps rating limit throughput when the drives are attached to a 12 Gbps SAS controller?

The cable meets the 6 Gbps SATA specification, so each drive is limited to 6 Gbps even when the host controller supports 12 Gbps SAS signalling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.