Vszerda
Vszerda SA4-6ST-6ST7PFRSSD SAS 4.0 6 SATA to 6 SATA 7Pin Female Right Angle 100cm
Connects six SATA drives via right-angle female connectors on a 100cm SAS 4.0 cable
- TypeSAS
- Length18
- Connector DetailMini Sas
- Terminal GenderFemale-to-Female
- FeaturesHigh-speed transfer, right-angle design
- Connect up to six SATA drives with a single cable
- Right-angle connectors fit tight server bays
- 100 cm length reaches across full-height chassis
- SAS 4.0 interface moves data at high speed
- Labelled ends simplify multi-drive management
Six-drive SATA cable for dense storage arrays
This SAS 4.0 cable splits one Mini SAS connector into six SATA 7-pin female right-angle plugs, letting you attach up to six drives from a single port. It suits server builders and storage integrators who need high-density drive connectivity in rack or tower chassis. The 100 cm length gives routing flexibility across full-height cases or backplanes.
Right-angle plugs and labeled ends simplify cable
Each SATA connector is angled to hug the drive edge, reducing bend radius and freeing vertical space in tight drive cages. Printed labels on every tail let technicians trace the correct path without trial and error, cutting install time and preventing mis-wired ports during maintenance windows.
18 cm Mini SAS pigtail reaches host controllers
The short 18 cm lead from the Mini SAS end to the splitter block keeps the bulk near the drives, not the controller, improving airflow and reducing strain on the motherboard or HBA port. Female-to-female gender throughout means the cable plugs directly into standard SATA drive connectors and a Mini SAS receptacle without adapters.
Highlights
- Connect up to six SATA drives with a single cable
- Right-angle connectors fit tight server bays
- 100 cm length reaches across full-height chassis
- SAS 4.0 interface moves data at high speed
- Labelled ends simplify multi-drive management
Specifications
| Brand | ST-JY |
|---|---|
| Model | SA4-6ST-6ST7PFRSSD |
| Type | SAS |
| Length | 18 |
| Connector Detail | Mini Sas |
| Terminal Gender | Female-to-Female |
| Features | High-speed transfer, right-angle design |
Questions about this item
Will the right-angle SATA connectors need periodic replacement in a 100cm cable run?
The right-angle connectors are built from robust materials for long-term use and stable connections in demanding environments, reducing the need for frequent replacement.
What is the length limit for reliable signal integrity on this SAS 4.0 cable?
The cable is 100cm long, designed to support high-speed data transfer across six SATA drives within that distance.
How much heat does the 18-pin Mini SAS interface generate during all-day operation?
As a passive cable assembly, it does not generate its own heat; thermal load comes from the connected drives and controller instead.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



