We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RJ45 male plug to 8P8C female screw terminal adapter, compact plastic and metal body

Vszerda

Vszerda RJ45 Male to 8P8C Female Screw Terminal Adapter Black

SKU CH-ZBQ2-ZZTDM

Converts an RJ45 plug to eight screw terminals wired to the EIA/TIA 568B standard for tool-free UTP cable termination

  • TypeEthernet
  • Cat7
  • Connector ARJ45
  • Colorintegrated
  • Features, , , ,
  • Tool-free termination with included screwdriver and wire stripper
  • Wired to EIA/TIA 568B standard for structured cabling
  • Compact 3.8 x 3.4 x 1.3 cm black plastic-and-metal housing
  • Supports UTP Cat5, Cat6 and Cat7 cables for power or data distribution
  • Gold-plated RJ45 male to 8P8C female screw terminals for reliable contact

RJ45 to Screw Terminal Adapter

The Vszerda adapter converts a standard RJ45 male plug into an 8P8C female screw terminal block. It is intended for installers who need to terminate UTP cables without a crimp tool, using only a wire stripper and the included screwdriver. The wiring follows the EIA/TIA 568B standard for structured cabling.

Passive Connector Thermals

As a passive component with no active electronics, the adapter generates no heat and produces no noise during operation. It draws no power of its own and simply passes through whatever signal or low-voltage power is present on the connected pairs. The plastic and metal housing remains at ambient temperature in normal use.

Replaces Field Crimping

This adapter replaces the need for field crimping when time, tool access or cable routing makes a standard RJ45 plug impractical. It is suited for basic power or data distribution, splitting pairs on Cat5, Cat6 or Cat7 cable, and connecting to baluns with RJ45 video ports. It is not recommended for actual Ethernet traffic where certified crimped connections are required.

Highlights

  • Tool-free termination with included screwdriver and wire stripper
  • Wired to EIA/TIA 568B standard for structured cabling
  • Compact 3.8 x 3.4 x 1.3 cm black plastic-and-metal housing
  • Supports UTP Cat5, Cat6 and Cat7 cables for power or data distribution
  • Gold-plated RJ45 male to 8P8C female screw terminals for reliable contact

Specifications

BrandzdyCGTime
TypeEthernet
Cat7
Connector ARJ45
Colorintegrated
Features, , , ,

Questions about this item

How do I wire the screw terminals to match the 568B standard?

Strip each solid UTP conductor, insert it into the labelled 8P8C terminal block following the printed colour code, and tighten the captive screws with the supplied screwdriver; no soldering is required.

Will the plastic housing or screw contacts degrade if I re-terminate the same cable several times?

The screw terminals are rated for repeated tightening, but the plastic body can crack if over-torqued; plan one termination per install and replace the adapter if you need to move the connection.

At what cable length does signal loss make this adapter unsuitable for gigabit Ethernet?

The manufacturer states it is not recommended for actual Ethernet traffic; use it only for low-speed data, power distribution or CCTV baluns where Cat5, Cat6 or Cat7 UTP runs are short.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.