We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black metal RJ45 splitter with USB power cable

Vszerda

Vszerda RJ45 Ethernet Splitter 1 to 2 Out, 1000Mbps with USB Power Cable

SKU CH-S0SB-TG708

Gigabit Ethernet splitter turns one RJ45 port into two simultaneous 1000 Mbps connections up to 100 m with USB power

  • Splits one Ethernet port into two simultaneous connections
  • Each connection delivers up to 1000Mbps transmission speed
  • Extends network reach up to 100 meters over standard cable
  • Gold-plated contacts on eight cores ensure stable signal transfer
  • Works with Cat5 through Cat8 cables and common network devices

What this splitter does

The Vszerda RJ45 Ethernet Splitter turns a single gigabit port into two independent connections, each capable of 1000Mbps. It is built for homes or small offices that need to add a second wired device without running new cable. The unit draws power from an included USB cable and works with Cat5 through Cat8 patch leads. Buyers who need more than two extra ports or who require Power over Ethernet will not be served by this device.

Sustained throughput

Each of the two output ports can maintain up to 1000Mbps simultaneously because the internal chips keep the signal paths isolated. The supplier notes that real-world speed is still capped by the upstream router or switch, so a 100Mbps uplink will limit both branches to 100Mbps. Gold-plated contacts and a metal housing help keep signal quality stable over long runs. The extender function supports cable lengths up to 100 metres without extra amplification.

Check before ordering

Verify that the source port and the two destination devices all negotiate gigabit speeds; a single 100Mbps link will drag both branches down. Ensure a spare USB port or charger is nearby to feed the splitter’s power cable. Confirm that your existing patch cables are Cat5e or better so the 1000Mbps rating can actually be reached. The splitter does not create new bandwidth, it only divides what the upstream connection already provides.

Highlights

  • Splits one Ethernet port into two simultaneous connections
  • Each connection delivers up to 1000Mbps transmission speed
  • Extends network reach up to 100 meters over standard cable
  • Gold-plated contacts on eight cores ensure stable signal transfer
  • Works with Cat5 through Cat8 cables and common network devices

Specifications

No published specifications for this item yet.

Questions about this item

Does the Vszerda splitter generate noticeable heat or draw extra power when both ports run at 1000Mbps all day?

The metal housing provides good heat dissipation and the device is powered by the included USB cable, so it stays cool during continuous gigabit use.

What must I already own for this splitter to work — specific cable category, router ports or power source?

You need a standard 8-core Cat5, Cat5e, Cat6, Cat7 or Cat8 cable, a free USB port for power, and a router or switch with an available RJ45 port.

Will my older Cat5e patch cables and 100Mbps switch slow down the Vszerda splitter or cause interference?

The splitter supports Cat5e and negotiates the highest speed each link allows; signals on the two output ports do not interfere with each other.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.