Vszerda
Vszerda RCA AV to VGA Media Converter 165 MHz
Converts composite RCA video to VGA for projector use with 165 MHz bandwidth and USB power
- Converts composite RCA sources to VGA displays
- 165 MHz bandwidth supports clear video signals
- USB power allows portable projector set-ups
- Compact ABS housing fits tight installation spaces
- Simple plug-and-play operation with no drivers needed
Versatile RCA to VGA Conversion
This compact Vszerda converter bridges legacy RCA sources to VGA displays, accepting composite video through a single RCA input and outputting a VGA signal suitable for projectors. It draws power from a USB source, removing the need for a separate mains adapter. The unit is housed in a white ABS enclosure measuring approximately 5 x 4 x 3 cm.
Low Heat Silent Operation
With no active cooling components the device runs completely silently and generates negligible heat during normal use. The 165 MHz bandwidth supports standard-definition and common enhanced-definition timings without thermal throttling. Power consumption is minimal, satisfied entirely by a standard USB port on the projector or a nearby charger.
Simple Projector Integration
The converter requires only a free USB port for power and a VGA cable to the display, freeing up HDMI or other digital inputs on the projector for other sources. Its tiny footprint lets it sit inline behind the projector or on a shelf without blocking adjacent ports. Buyers needing multiple simultaneous RCA sources or audio extraction should look elsewhere, as the unit handles a single video stream only.
Highlights
- Converts composite RCA sources to VGA displays
- 165 MHz bandwidth supports clear video signals
- USB power allows portable projector set-ups
- Compact ABS housing fits tight installation spaces
- Simple plug-and-play operation with no drivers needed
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the Vszerda converter to my projector using the VGA output?
Plug the converter's VGA port into the projector, connect the RCA source to the single RCA input, then attach the USB power cable to a 5 V supply before turning everything on.
What ongoing upkeep does the Vszerda AV to VGA unit require?
No scheduled maintenance is needed; keep the vents clear, avoid bending the short cables, and replace the USB power lead only if it becomes damaged.
At what bandwidth ceiling does the Vszerda converter hit its limit during continuous operation?
The 165 MHz frequency bandwidth is the first hard limit encountered under sustained video throughput.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



