We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
QSFP+ SFF-8436 to Mini SAS SFF-8088 copper cable 9.8ft 30AWG 100 Ohm passive

Vszerda

Vszerda QSFP SFF-8436 to SFF-8088 Mini SAS cable 9.8ft 10 Gbps 30AWG 100 Ohm passive

SKU CH-KD05-G3722

Connects QSFP+ (SFF-8436) ports to SFF-8088 Mini SAS devices over 9.8 ft with 10 Gbps per channel on 30 AWG, 100 Ohm passive copper

  • TypeMini SAS
  • ColorSFF-8088 to QSFP(SFF8436)
  • Length9.8
  • Connector DetailComponent
  • Terminal GenderMale-to-Male
  • Speed10 gigabits_per_second
  • QSFP+ (SFF-8436) to SFF-8088 hybrid cable connects QSFP and Mini SAS gear
  • 10 Gbps per channel throughput for high-speed SAS links
  • 8 ft passive copper reach suits rack-to-rack runs
  • 30 AWG, 100 Ohm construction with controlled pair-to-pair skew
  • Compliant with QSFP MSA and SAS 3.0 specifications

QSFP+ SFF-8436 to SFF-8088 cable

This 9.8ft passive copper cable connects a QSFP+ port to an SFF-8088 Mini SAS connector. It serves administrators linking switches or host adapters to external storage enclosures that use the SFF-8088 interface. The male-to-male assembly arrives new and ready for rack installation.

Fits 10 Gbps SAS links with 30AWG conductors

The 30AWG copper pairs present a 100 Ohm differential impedance and meet SAS 3.0 electrical requirements. No external power is needed, so the cable draws no additional budget from the chassis supply. QSFP MSA compliance allows use with multi-vendor QSFP+ ports that accept passive direct-attach copper.

Sustained 10 Gbps per channel with controlled skew

Precision pair-matching minimises pair-to-pair skew, helping the link maintain its rated speed over the full 9.8ft run. Passive construction means thermal output stays negligible during continuous traffic. The cable does not support active equalisation or longer reaches beyond the specified length.

Highlights

  • QSFP+ (SFF-8436) to SFF-8088 hybrid cable connects QSFP and Mini SAS gear
  • 10 Gbps per channel throughput for high-speed SAS links
  • 8 ft passive copper reach suits rack-to-rack runs
  • 30 AWG, 100 Ohm construction with controlled pair-to-pair skew
  • Compliant with QSFP MSA and SAS 3.0 specifications

Specifications

BrandH!Fiber.com
TypeMini SAS
ColorSFF-8088 to QSFP(SFF8436)
Length9.8
Connector DetailComponent
Terminal GenderMale-to-Male
Speed10 gigabits_per_second
SpecificationsMini SAS
Shieldingcalculator
Featurescalculator

Questions about this item

What is the maximum cable length before signal loss at 10 Gbps?

The cable is 9.8 ft (3 m) long, built with 30 AWG copper and 100 Ohm impedance to meet SAS 3.0 reach limits for passive assemblies.

Does the passive design generate heat or need extra cooling during continuous operation?

No active components are present, so the cable produces negligible heat and requires no additional cooling when running all day.

Which ports must my equipment already have to use this cable?

One end needs a QSFP+ (SFF-8436) port and the other an SFF-8088 Mini SAS connector; both must be male receptacles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.