We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U redundant PSU, gold-finger connector, 320 by 54 by 40 mm

Vszerda

Vszerda PWS-706P-1R 700W/750W 1U redundant power adapter

SKU CH-38YF-0YCWS

1U redundant PSU delivers 700W at 100-140V or 750W at 200-240V with 80 Plus Platinum efficiency and gold-finger output for validated Supermicro chassis

  • Redundant 1U design keeps systems running during module failure
  • 80 Plus Platinum rating delivers 91% peak energy efficiency
  • 700W at 100-140V or 750W at 200-240V input range
  • Gold finger 54.5mm output fits validated Supermicro chassis
  • Compact 320 x 54 x 40mm form factor saves rack space

700W/750W 1U redundant power adapter

The Vszerda PWS-706P-1R is a 1U redundant power supply delivering 700W at 100-140V or 750W at 200-240V AC input. It uses a gold-finger output connector and fits validated Supermicro systems and chassis. The unit carries 80 Plus Platinum certification with active PFC and PMBus monitoring.

91% peak efficiency under sustained load

The supply reaches 91% peak energy efficiency, reducing waste heat during continuous operation in validated 1U server chassis. Redundant architecture allows the remaining module to maintain power delivery if one unit fails. PMBus support enables real-time monitoring of voltage, current and temperature.

Check chassis and system validation lists

Verify your chassis appears in the validated list such as CSE-113AC2-R706WB2 or CSE-815TQ-R706WB before ordering. Confirm the gold-finger 54.5mm molex output matches your backplane. This unit is not for builds needing ATX or EPS standard connectors or non-validated enclosures.

Highlights

  • Redundant 1U design keeps systems running during module failure
  • 80 Plus Platinum rating delivers 91% peak energy efficiency
  • 700W at 100-140V or 750W at 200-240V input range
  • Gold finger 54.5mm output fits validated Supermicro chassis
  • Compact 320 x 54 x 40mm form factor saves rack space

Specifications

No published specifications for this item yet.

Questions about this item

How loud and hot does the 700 W unit get under continuous load?

Peak efficiency reaches 91 %, so waste heat is low; the 1U form factor uses internal fans sized for the 320 x 54 x 40 mm chassis.

Which chassis or backplane must I already have for the 54.5 mm gold-finger connector to seat?

Validated chassis include CSE-113AC2-R706WB2, CSE-116AC2-R706WB, CSE-116TQ-R706WB and CSE-815TQC-R706WB families.

Will this supply run in a Supermicro SYS-1028R-WTR that I am keeping?

Yes — SYS-1028R-WTR appears in the validated systems list for the PWS-706P-1R.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.