We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda PWM 12V USB Fan Step-Up Cable 2-Pack 30cm

SKU CH-WB98-RR1PQ

A USB-to-fan adapter cable with a built-in 12 V step-up circuit delivers .4 A for full-speed cooling

  • Connector TypeUSB Type A
  • Connector DetailUSB Type A
  • Terminal Gender???
  • ConstructionCopper
  • Featuresshort-circuit protection
  • Boosts 5 V USB to 12 V for full fan speed
  • 4 A output drives PWM fans and hubs
  • Plug-and-play with no software required
  • Braided 22 AWG copper cable with PVC insulation
  • 30 cm length suits compact builds

Power Delivery

This USB to fan adapter cable converts a standard 5V USB Type A port into a 12V output capable of delivering 0.4A. It enables full-speed operation of 3-pin or 4-pin PWM case fans directly from USB power sources.

Cable Specifications

Each cable measures 30cm in length and uses 22AWG pure copper conductors with PVC insulation rated to 80 centigrade. The braided sleeve and injection-moulded connectors protect the cores and reduce wire visibility inside a build.

Included Accessories

The pack contains two identical step-up cables, allowing two fans or a fan plus a hub to be powered simultaneously. No software or drivers are required for plug-and-play operation.

Highlights

  • Boosts 5 V USB to 12 V for full fan speed
  • 4 A output drives PWM fans and hubs
  • Plug-and-play with no software required
  • Braided 22 AWG copper cable with PVC insulation
  • 30 cm length suits compact builds

Specifications

BrandVszerda
Connector TypeUSB Type A
Connector DetailUSB Type A
Terminal Gender???
ConstructionCopper
Featuresshort-circuit protection

Questions about this item

What does the 12V 0.4A step-up rating mean when the cable is plugged into a standard USB port?

The built-in boost circuit converts the 5V USB supply to 12V at up to 0.4A, letting a 3-pin or 4-pin PWM fan run at full speed without a motherboard header.

How does the USB Type-A interface limit the power available to the fan?

A standard USB-A port supplies 5V; the cable's internal circuit steps this to 12V but caps output at 0.4A, so fans drawing more current will not reach full RPM.

Will the 30cm length and 22AWG conductors fit cleanly inside a typical PC case?

At 30cm the sleeved cable reaches most fan mounts without slack, and the 22AWG pure-copper cores handle the 0.4A load while the PVC insulation is rated to 80°C.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.