Vszerda
Vszerda PW-008 6Pin Female to 6Pin Male 180 Degree Angled Power Adapter 2pcs
Two angled adapters reroute ATX 6‑pin power cables 180 degrees for tight chassis clearance
- Color6PIN*2
- 180° angled adapter reroutes 6-pin power cables from vertical to horizontal
- Low-profile design fits graphics cards into height-restricted chassis
- Female-to-male 6-pin connectors maintain standard ATX pinout
- Pair includes both up-angled and down-angled adapters for flexible routing
- New Vszerda PW-008 adapters ship ready for desktop graphics card installs
Angled 6-pin power adapter for tight builds
This pair of ATX 6-pin adapters reorients the cable by 180 degrees so the connector runs horizontally instead of vertically. Each pack contains one up-angled and one down-angled unit, letting you route power into graphics cards or other devices where vertical clearance is too low. They are intended for desktop builders working in compact chassis where straight headers foul the side panel or adjacent components.
Mechanical limits of the ATX 6-pin header
The adapter does not change the electrical specification of the 6-pin connection; it only redirects the physical exit angle. Pin pitch, current rating and keying remain identical to a standard ATX header, so no extra power is delivered and no signalling is altered. Builders must still ensure the power supply itself can meet the component’s draw, because the adapter adds no capacity.
Replaces a straight 6-pin plug when height is
If a graphics card or daughter board sits too close to the case roof for a straight 6-pin plug to fit, these angled adapters solve the interference without swapping the PSU or cable set. The jump is worth it when the alternative is forcing a cable bend that stresses the socket or prevents the side panel from closing. They do not help if the obstacle is cable length, connector count or a missing 6-pin header on the power supply.
Highlights
- 180° angled adapter reroutes 6-pin power cables from vertical to horizontal
- Low-profile design fits graphics cards into height-restricted chassis
- Female-to-male 6-pin connectors maintain standard ATX pinout
- Pair includes both up-angled and down-angled adapters for flexible routing
- New Vszerda PW-008 adapters ship ready for desktop graphics card installs
Specifications
| Brand | Vszerda |
|---|---|
| Model | PW-008 |
| Color | 6PIN*2 |
Questions about this item
Which angle should I choose between the up-angled and down-angled adapters in the pack?
The pack includes one up-angled and one down-angled adapter so you can pick the orientation that clears the side panel or other components in your specific chassis.
What does the 180-degree angle do once the adapter is fitted to a graphics card?
It rotates the 6-pin cable from a vertical to a horizontal exit, letting the cable run flat against the board instead of sticking straight up.
Does the ATX 6-pin interface limit how much power the adapter can pass?
The adapter uses the standard ATX 6-pin connector, so it carries whatever current your power supply and graphics card negotiate over that interface.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115626BTC
In stock
