We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small black USB VGA to RJ45 dongles side by side

Vszerda

Vszerda PM01-4 4 Pack USB VGA to RJ45 Dongle KVM Switch

SKU CH-5BTD-NDDNN

Four proprietary USB VGA dongles extend server connections up to 230 ft over Cat5e or Cat6 cable

  • Monitor ConnectionsVGA+USB to RJ45 4 pack
  • Dimensions6.8 in x 9.8 in x 1.0 in
  • Weight0.361 kilograms
  • 4-pack simplifies multi-server management with four USB VGA to RJ45 dongles included
  • Extends server control up to 230 ft or 70 m using Cat5e or Cat6 cable
  • Distortion-free VGA signal transmission ensures clear video quality over distance
  • Proprietary design works exclusively with MT-VIKI KVM switches including 1708 and 1716 models
  • Compact 6.8 x 9.8 x 1.0 in size and 0.361 kg weight fits tight rack spaces

Four-pack VGA-to-RJ45 dongles

This set contains four Vszerda PM01-4 dongles that convert a USB and VGA connection to a single RJ45 port. They are intended for administrators who need to place servers up to 230 ft from an MT-VIKI KVM console using standard Cat5e or Cat6 cable.

Proprietary MT-VIKI compatibility

Each dongle works only with MT-VIKI Cat5e KVM switches such as the 1708MS-IP, 1716MS-IP, 1708MS and 1716MS models. They cannot be used with other brands of Cat5 KVM hardware, so the upgrade is only worthwhile when expanding or replacing dongles on an existing MT-VIKI installation.

Distance and cable limits

Signal integrity is specified up to 70 m over Cat5e or Cat6 cabling. Beyond that range the VGA picture may degrade, and the proprietary interface prevents use with generic KVM extenders or non-MT-VIKI switches.

Highlights

  • 4-pack simplifies multi-server management with four USB VGA to RJ45 dongles included
  • Extends server control up to 230 ft or 70 m using Cat5e or Cat6 cable
  • Distortion-free VGA signal transmission ensures clear video quality over distance
  • Proprietary design works exclusively with MT-VIKI KVM switches including 1708 and 1716 models
  • Compact 6.8 x 9.8 x 1.0 in size and 0.361 kg weight fits tight rack spaces

Specifications

BrandVszerda
ModelPM01-4
Part NumberPM01-4
Monitor ConnectionsVGA+USB to RJ45 4 pack
Dimensions6.8 in x 9.8 in x 1.0 in
Weight0.361 kilograms

Questions about this item

What server-side clearance does each PM01-4 dongle need to fit a VGA-plus-USB port cluster?

Each dongle measures 6.8 in by 9.8 in by 1.0 in and weighs .361 kg, so allow that footprint plus room for the CAT6 plug at the server rack.

Which step do installers most often skip when linking the dongle to an MT-VIKI 1708 or 1716 KVM switch?

They forget to use a Cat5e or Cat6 patch cord — not a crossover cable — and to verify the link stays within the 230 ft / 70 m limit before locking the rack.

When should the CAT6 patch cable between dongle and KVM console be replaced to keep distortion-free VGA?

Replace the patch cable if it shows kinks, connector wear, or if the run exceeds 70 m, because signal integrity degrades beyond the rated distance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.