Vszerda
Vszerda PCIe X1 to PCI Riser Card USB 3.0 ASM1083
Converts a PCIe x1 slot to a PCI bus connection using an ASM1083 chip and USB 3.0 cable
- Converts PCIe x1 to standard PCI slot using ASM1083 chip
- USB 3.0 cable link provides flexible desktop installation
- High-efficiency adapter design maintains signal integrity across the riser
- Enables legacy PCI card use on modern PCIe-only motherboards
PCIe X1 to PCI riser with ASM1083
This adapter converts a PCIe x1 slot into a standard PCI slot using the ASM1083 chip and a USB 3.0 connection. It is intended for desktop builders who need to install a legacy PCI card in a modern motherboard that lacks native PCI sockets.
USB 3.0 cable enables flexible placement
The bundled USB 3.0 cable carries the signal between the PCIe x1 connector and the PCI riser board, allowing the legacy card to be mounted away from the motherboard. This helps when chassis layout or cooling clearance prevents direct insertion.
Highlights
- Converts PCIe x1 to standard PCI slot using ASM1083 chip
- USB 3.0 cable link provides flexible desktop installation
- High-efficiency adapter design maintains signal integrity across the riser
- Enables legacy PCI card use on modern PCIe-only motherboards
Specifications
No published specifications for this item yet.
Questions about this item
Will the USB 3.0 cable need replacing if the connector loosens over time?
The USB 3.0 cable is integrated into the riser assembly; if the connector wears out, the whole riser card would need to be swapped.
What throughput ceiling appears first when the ASM1083 bridge runs continuously?
The PCIe x1 link caps sustained transfer at one lane of PCI Express bandwidth, which the ASM1083 chip converts to USB 3.0 signalling.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



