We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda PCIe 8 Pin Male to Dual 8 Pin (6+2) Male Internal Power Cable 60cm+20cm

SKU CH-KP65-E5QPK

Splits a single PCIe 8-pin connector into two 8-pin (6+2) outputs with 60 cm and 20 cm cable lengths

  • Splits one PCIe 8-pin into two 8-pin (6+2) connectors for dual GPU power
  • 60 cm primary length plus 20 cm branch gives flexible routing in large cases
  • 8-pin male plug fits modular PSU ports directly without extra adapters
  • (6+2) design on each branch supports both 6-pin and 8-pin graphics cards

Dual 8-pin PCIe power splitter

This adapter converts a single 8-pin PCIe output from a modular power supply into two 8-pin (6+2) connectors. The 60 cm lead reaches the first graphics card while a 20 cm branch serves a second card. It suits builders adding a second GPU or replacing a missing factory cable in a modular PSU setup.

Not for single-card builds or non-modular units

The cable requires a modular PSU with a free 8-pin PCIe port; it cannot connect to fixed cables or motherboard power headers. Systems running only one graphics card gain no benefit, and builders needing more than two connectors must source additional splitters or a higher-output power supply.

Highlights

  • Splits one PCIe 8-pin into two 8-pin (6+2) connectors for dual GPU power
  • 60 cm primary length plus 20 cm branch gives flexible routing in large cases
  • 8-pin male plug fits modular PSU ports directly without extra adapters
  • (6+2) design on each branch supports both 6-pin and 8-pin graphics cards

Specifications

No published specifications for this item yet.

Questions about this item

Will the single 8-pin male connector handle the combined power draw of two graphics cards under sustained load?

The cable splits one 8-pin male into two 8-pin (6+2) male connectors, so the source connector and PSU rail must supply enough current for both devices.

Does the cable add noticeable heat or resistance during all-day mining or rendering?

The 60 cm main run plus 20 cm branch uses standard gauge wire for PCIe power; heat stays low if the PSU and connectors are rated for the total load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.