We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12-inch PCIe 6-pin male-to-female power extension cable with 18AWG copper conductors

Vszerda

Vszerda PCIe 6-pin Male to Female Extension Cable 12 inch 18AWG

SKU CH-FT4G-ZBYXB

A 12-inch PCIe 6-pin male-to-female extension cable with 18AWG copper conductors for GPU power connections

  • Extends GPU power reach with 12 inch length
  • 18AWG copper conductor delivers reliable current flow
  • Male-to-female PCIe 6-pin connects PSU to graphics card
  • 30CM ribbon cable eases routing inside the case
  • Flexible design reduces strain on the GPU port

PCIe 6-pin power extension

The Vszerda PCIe 6-pin Male to Female Extension Cable adds 12 inches of reach between a power supply and a graphics card. It uses an 18AWG copper conductor to carry the PCIe power signal. The male end plugs into the existing PSU cable while the female end accepts the GPU connector. This internal cable suits builders who need extra length for tidy routing in a computer or server case.

Installing the 12 inch extension

Installation is straightforward: disconnect the GPU power cable, insert the male end into the PSU lead, then plug the GPU connector into the female end. The flexible ribbon construction reduces strain on the graphics card port during routing. The only common issue is accidentally reversing the connectors, which prevents the GPU from receiving power. Ensure the latch on each connector clicks fully into place to avoid intermittent contact.

Check before ordering

Verify that your power supply provides a native PCIe 6-pin output and that your graphics card requires a 6-pin input. The cable does not convert between 6-pin and 8-pin configurations, so both ends must match the existing hardware. Confirm that the 12 inch / 30CM length covers the distance between the PSU and the GPU in your specific case layout. Buyers needing an 8-pin connection or a longer reach will need a different cable.

Highlights

  • Extends GPU power reach with 12 inch length
  • 18AWG copper conductor delivers reliable current flow
  • Male-to-female PCIe 6-pin connects PSU to graphics card
  • 30CM ribbon cable eases routing inside the case
  • Flexible design reduces strain on the GPU port

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the PCIe 6-pin extension is delivering power correctly after installation?

The GPU should power on and be detected in BIOS or the operating system without errors; a stable system under load indicates the 18AWG copper conductor is carrying current properly.

What connectors are included and is anything else required to use the cable?

The package provides a 12 inch PCIe 6-pin male to female extension; no additional parts are needed if your PSU and graphics card both have 6-pin PCIe ports.

Which cable length should I choose for a standard mid-tower build?

The 12 inch (30CM) length suits most mid-tower cases, giving enough reach to route behind the motherboard tray while keeping the 18AWG ribbon cable tidy.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.