We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White right-angle 12VHPWR adapter with aluminium shell, 180-degree turn, 16-pin GPU connector

Vszerda

Vszerda PCIe 5.1 600W 12VHPWR 12+4pin 16pin 180° Right Angle White

SKU CH-405D-SHB2C

A 600 W PCIe 5.1 adapter with a 180-degree right-angle 12+4 pin 12VHPWR connector for RTX 3090Ti, 4070Ti, 4080 and 4090 graphics cards

  • 180° right-angle design prevents cable strain and sharp bends
  • 12V-2x6 connector ensures full PCIe 5.1 compliance and safe 600W delivery
  • Aluminium mech-armor shell adds rigidity and vents heat away from terminals
  • 2 oz copper 4-layer PCB handles sustained high current without overheating
  • White finish matches modern builds while supporting RTX 3090Ti, 4070Ti, 4080 and 4090 cards

12VHPWR 600W Adapter for RTX GPUs

This Vszerda PCIe 5.1 adapter connects a 12+4pin 12VHPWR graphics card to a power supply using a 180-degree right-angle design. It is built for builders installing an RTX 3090 Ti, 4070 Ti, 4080 or 4090 where straight connectors would press against the side panel. The white aluminium housing matches light-themed builds.

Sustained 600W delivery with thermal venting

A 2oz copper, 4-layer PCB handles continuous 600W loads while integrated venting channels in the mech-armour shield dissipate heat during long rendering or gaming sessions. The 12V-2x6 specification connector maintains full contact with cable terminals, preventing the temperature rise that can occur when wires are bent tightly behind the card.

Check GPU clearance and model exclusions

Verify that the 180-degree orientation points the cable toward your routing path and that the slim profile fits between the card backplate and case panel. The adapter is not compatible with the MSI GeForce RTX 4090 Suprim Liquid X 24G and is not recommended for an RTX 5090 due to extreme power spikes; a gap-free installation is required for safe operation.

Highlights

  • 180° right-angle design prevents cable strain and sharp bends
  • 12V-2x6 connector ensures full PCIe 5.1 compliance and safe 600W delivery
  • Aluminium mech-armor shell adds rigidity and vents heat away from terminals
  • 2 oz copper 4-layer PCB handles sustained high current without overheating
  • White finish matches modern builds while supporting RTX 3090Ti, 4070Ti, 4080 and 4090 cards

Specifications

No published specifications for this item yet.

Questions about this item

Does the 180° right-angle 12VHPWR adapter run hotter than a straight connector when the GPU pulls 600W all day?

The 4-layer 2 oz copper PCB and vented aluminium shell are designed to dissipate heat at the full 600 W rating, so the right-angle geometry does not add thermal penalty.

Which power-supply cables must I already have to plug this 12+4 pin adapter into my RTX 4090?

Your PSU needs native 12VHPWR or 12V-2x6 output cables; the adapter converts that single 16-pin header to the card’s 12+4 socket.

Will the 180° white adapter fit beside the bulky cooler on my older RTX 3090 Ti without blocking the side panel?

The slim 180° profile clears most RTX 3090 Ti coolers, but the MSI Suprim Liquid X 4090 is explicitly listed as incompatible, so verify clearance on your specific card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.